== !Thermoelastic beam Properties of a Composite Tube == In this example, we want to compute the !Thermoelastic effective properties of a Composite Tube fabricated from plain weave made of isotropic elastic matrix and transversely isotropic elastic fiber. The MSG solid model is used to predict the effective elastic properties of a plain weave composite using a three part approach. The first part predicts the effective !Thermoelastic yarn properties based on the elastic fiber and matrix properties at the microscale. The second part takes the effective yarn properties and matrix properties to predict the !Thermoelastic properties of weave composites. The third part uses the effective weave properties in the structural analysis to predict the !Thermoelastic properties of the Composite Tube. [[BR]] [[BR]] [[Image(T0.1.jpg, desc="Yarn")]] [[Image(T0.2.jpg, desc="Weave")]] [[Image(P0.png, desc="Composite Tube")]] [[BR]] [[BR]] The fiber properties are defined as transversely isotropic elastic by means of engineering constants and the matrix properties are given by means of the elastic modulus with a constant Poisson's ratio equal to 0.33 as specified in the table below. [[BR]] [[BR]] [[Image(P0.1.png, desc="Material Properties")]] [[BR]] [[BR]] [[BR]] We will use a square pack 2D SG with fiber volume fraction equal to vf = 0.64. == Software Used == We will use !TexGen4SC 2.0, !SwiftComp 2.1 and Abaqus CAE with the Abaqus !SwiftComp GUI for this tutorial. !TexGen4SC 2.0 will be used to run the Thermoelastic homogenization of the fiber-matrix square pack microstructure and also for the !Thermooelastic homogenization of the plain weave laminate. Abaqus CAE will be used to model the tube and to run the !Thermoelastic homogenization while !SwiftComp runs in the background. ---- == Solution Procedure == The problem is solved in the following three steps: [[BR]] Part 1- Micro-scale analysis of the square-pack fiber matrix micro structure using Texgen4SC. [[BR]] Part 2- Meso-scale analysis of the plain weave laminate using Texgen4SC2.0. [[BR]] Part 3- Macro-scale analysis of the tube using Abaqus CAE with the Abaqus !SwiftComp GUI and !SwiftComp 2.1. [[BR]] ---- == Solution Procedure == Below describes the step-by-step procedure you followed to solve the problem. It is better to accompany this document with the companion youtube video. ====Part 1- Micro-scale analysis of the square-pack fiber matrix micro structure using Texgen4SC.==== ''' # Step 1.1.''' Create the plain weave pattern using !TexGen4SC 2.0. Launch !TexGen4SC 2.0 on cdmHUB, the Go to window-> controls-> “Weave” to create mesoscale plain weave SG. [[BR]] [[Image(T1.1.png, desc="Weave Wizard")]] [[BR]] ''' # Step 1.2.''' Keeping the geometric properties as required, Click on the upper-right and lower-left squares to get the woven pattern. [[BR]] [[Image(T1.3.png, desc="Weave Pattern")]] [[BR]] ''' # Step 1.3.'''Enter the material properties for the fiber and matrix and set fiber Volume fraction as 0.64 . [[BR]] [[Image(P1.2.png, desc="Adding Material properties")]] [[BR]] ''' # Step 1.4.''' Click “Microscale” under “Homogenization” tab for yarn property calculation. Select “Thermoelastic” as the type of analysis and Click “Finish”. [[BR]] [[Image(P1.2.png, desc="Homogenization")]] [[BR]] ''' # Step 1.5.''' Now a .sc file (micro.sc) will be generated that !SwiftComp will take as the input. !SwiftComp will run on the cloud to calculate Thermoelastic properties of yarns, e.g., effective microscale properties. In the pop-up window, you will find the analysis results. [[BR]] [[Image(P1.5.png, desc="Micro scaleResuts")]] [[BR]] ==== Part 2- Meso-scale analysis of the plain weave laminate using Texgen4SC. ==== ''' # Step 2.1.''' Go to “File->Export->!SwiftComp File” to generate the .sc file for mesoscale analysis. [[BR]] [[Image(T2.1.png, desc="weave mesh")]] [[BR]] ''' # Step 2.2.''' Define the voxel mesh, Select “Thermoelastic” as Type of analysis and Select “Plate/Shell model” and “Kirchhoff-Love plate”. [[Image(P2.2.png, desc="SwiftComp Wizard")]] [[BR]] ''' # Step 2.3.''' Save the .sc (!SwiftComp input file) file with a filename of your choice. Click “Mesoscale” in “Homogenization” tab, which will call !SwiftComp to calculate fabric properties. [[BR]] [[Image(P2.4.png, desc="Meso Scale Results")]] [[BR]] ''' # Step 2.4.'''Transfer this file to your local computer for further analysis. ====Part 3- Macro-scale analysis of the Corrugated Boom using Abaqus CAE with the Abaqus !SwiftComp GUI and !SwiftComp 2.1. ==== [[BR]] ''' # Step 3.1.''' Set sketch plane for customized SG -> Create planar shell -> Select the plane and vertical axis -> Sketch the cross section shown, as a shell of thickness to 1 mm. Partition the part . [[BR]] [[Image(P3.1.png, desc="Part dimensions")]] [[BR]] [[BR]] [[Image(P3.12.png, desc="Part Geometry")]] [[BR]] ''' # Step 3.2.''' Enter the material properties for the model. First we need to choose the material properties from the results of the computed effective Thermoelastic properties in the previous part. Within the Materials section of Abaqus CAE, we create a material called “Material” and add the corresponding properties. [[BR]] [[BR]] [[Image(P3.3.png, desc="Material properties ")]] [[BR]] ''' # Step 3.4.''' Now go to New Layups and add the material, section name, Layup and thickness to create the required layup. This can be repeated if we have multiple layups. We will use (0/45/-45/0)5 with a individual ply thickness of 0.1mm as the laminate for the tube. [[BR]] [[Image(P3.4.png, desc="Layups")]] [[BR]] ''' # Step 3.5.'' To assign the layup, go to Create 2D SG: Assign Layups and the pick the baseline, the line opposite to the baseline and the area between the two picked line for the right flange as shown and then hit Ok. Do this for all sections [[BR]] [[Image(P3.6.png, desc="Assign Layups")]] [[Image(P3.5.png, desc="Assign Layups")]] [[BR]] ''' # Step 3.6.'' Now go to Assemble, create the part instance with dependent mesh. [[BR]] [[Image(P3.7.png, desc="assembly")]] [[BR]] ''' # Step 3.7.'''In the Mesh section, Seed the Part and set approximate global mesh size, then Click ‘Mesh Part’ [[BR]] [[Image(P3.8.png, desc="Mesh")]] [[BR]] ''' # Step 3.8.'''Create a job and write its input file. [[BR]] [[Image(P3.9.png, desc="ip file")]] [[BR]] ''' # Step 12.'''To the effective Thermoelastic properties. we click on Homogenization and select Thermoelastic in Analysis Type. Homogenize the part preferably as a beam using the Homogenization via input file option to get the final results. [[BR]] [[Image(C3.10.png, desc="Homogenization")]] [[BR]] [[BR]] ===References=== # Liu, X.; Tang, T.; Yu, W., Pipes, R. B.: “Multiscale modeling of viscoelastic behavior of textile composites,” International Journal of Engineering Science, Vol 130, September 2018, pp. 175-186, DOI: 10.1016/j.ijengsci.2018.06.003. # Rique, O.; Liu, X.; Yu, W., Pipes, R. B.: “Constitutive modeling for time- and temperature-dependent behavior of composites,” Composites Part B: Engineering, Vol 184, March 2020, DOI: 10.1016/j.compositesb.2019.107726.