-
Mechanics of Structure Genome: Reproduce 3D FEA Using Simple Structural Models for Aero Structures
10 Sep 2015
This presentation is an extended lecture delivered to the Boeing FEA Community of Excellence on Sept 10th.The Mechanics of Structure Genome (MSG) has been recently developed at Purdue with the promise to revolutionize the analysis of composite structures. MSG can reproduce 3D FEA using simple...
-
Presentation of Micromechanics Simulation Challenge Level I Initial Results
04 Aug 2015
The attached slides summarize the Micromechanics Simulation Challenge Level I Initial Results in a presentation format. The complete report can be found at https://cdmhub.org/resources/948, and all the files supporting the results can be found...
-
SwiftComp: Right Results Right Away
13 May 2015
This presentation gives a brief review of SwiftComp which is a general-purpose multiscale constitutive modeling code. It can bridge microstructure with the final macroscopic structural model. It takes a FE mesh of Structure Genome, which is defined as the smallest mathematical building block of...
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
31 Mar 2015
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
Skill of Using Surface Element in ANSYS
26 Mar 2015 | Downloads
Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...
-
CDM Hub Introduction
17 Mar 2015 | Online Presentations | Contributor(s): SME Project
-
CATIA Composites Braiding
09 Mar 2015 | Animations
A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.
-
Structure Genome: Fill the Gap between Materials Genome and Structural Analysis
06 Jan 2015 | Online Presentations
This presentation is given at 2015 AIAA SciTech conference. A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs...
-
Structure Genome: Fill the Gap between Materials Genome and Structural Analysis
29 Nov 2014 | Publications
A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...
-
DiBenedetto Equation: Tg and DOC
23 Jul 2014 | Tools
DiBenedetto Equation: Glass Transition Temperature Dependence on Degree of Cure
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
31 Aug 2024 | Teaching Materials | Contributor(s): SME Project
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
23 Jul 2014 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
13 May 2013 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
Composite Materials and Structures 1972-2012: Grand Challenges
23 Jul 2014 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
31 Aug 2024 | Series | Contributor(s): SME Project
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
13 May 2013 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
Nanohub and the HUBzero Platform
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
The Challenge and Vision for cdmHUB
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop
-
Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop
13 May 2013 | Teaching Materials
Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...
-
Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation
13 May 2013 | White Papers/Research Documents
A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation. An overview of the solution development is provided, followed by numerous examples of tool use and evaluation. The document concludes with an evaluation of the tool maturity level. The...