-
Hubert McGill
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
HyperSizer Pro Software from Collier Research
20 Aug 2014 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
HyperSizer Pro Software from Collier Research
20 Aug 2014 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Interlaminar Stresses in Symmetric Angle-Ply Laminates Subjected to Anticlastic Bending Deformation
04 Jun 2014 | Tool Information
The aim of the present work is to develop a solution for the interlaminar stress field in a symmetric and balanced, angle-ply laminate subjected to anticlastic bending deformation. Further, this class of problems is considered in order to elucidate the behavior of angle-ply laminates...
-
Jack Gillespie CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Jacob Fish Columbia CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Jerry Young Boeing CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Keith Kedward and Composites Design (Recorded Talk)
22 Sep 2014 | Teaching Materials
Professor Byron Pipes speaks at the 2014 ASC Conference at UCSD in tribute to Keith Kedward on the subject of Composites Design.
-
Keith Kedward and Composites Design (Slides)
22 Sep 2014 | Teaching Materials
Professor Byron Pipes' slides from the 2014 ASC meeting at UCSD discussing Keith Kedward and Composites Design
-
Nanohub and the HUBzero Platform
16 Aug 2014 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Orthotropic Stress Concentration Factor
25 Sep 2014 | Tools
Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate
-
Ove Schuett Dassault Systemes Americas CDM Hub
27 Sep 2024 | Online Presentations | Contributor(s): SME Project
-
Pascal Hubert CDM Hub
27 Sep 2024 | Online Presentations | Contributor(s): SME Project
-
Plane-Stress Compliance Transform
25 Sep 2014 | Tools
Transforms 2D compliance terms by rotation about the 3-axis
-
Poursartip UBC
27 Sep 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Puck Failure Criteria
22 May 2013 | Downloads
Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...
-
Schoeppner AFRL
27 Sep 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Schuett Dassault
27 Sep 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
The Challenge and Vision for cdmHUB
27 Sep 2024 | Online Presentations | Contributor(s): SME Project
Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop
-
The Challenge and Vision for cdmHUB
27 Sep 2024 | Online Presentations | Contributor(s): SME Project