-
Composite Stiffness Property Prediction
07 Aug 2017
Micromechanical models for the composite axial tensile, transverse tensile, and axial shear are combined into one tool with the objective of comparing their effectiveness as property prediction methods. Rule of mixtures models (ROM) and the composite cylinder model (CCM) results for...
-
Computational evaluation of effective stress relaxation behavior of polymer composites
11 Jul 2017
This paper presents a micromechanics model to characterize the effective stress relaxationstiffness of polymer composites. The linear viscoelastic behavior of polymer material wasmodeled by hereditary integral. The proposed model was established based on thevariational asymptotic method for unit...
-
DiBenedetto Equation: Tg and DOC
23 Jul 2014 | Tools
DiBenedetto Equation: Glass Transition Temperature Dependence on Degree of Cure
-
Effective Lamina and Laminate Properties
13 May 2013 | Tools
Calculate effective lamina and laminate properties from phase properties and layup.
-
Effective Lamina and Laminate Properties
10 Oct 2013 | Tools
Calculate effective lamina and laminate properties from phase properties and layup.
-
Finite element unit cell model based on ABAQUS for fiber reinforced composites
10 Oct 2013 | Downloads
-
Free Edge Elasticity Solution
13 May 2013 | Tools
Simulate stress, strain and displacements in an composite angle-ply laminate subjected to uniform axial extension, anticlastic curvature and thermoelastic deformation.
-
Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation
13 May 2013 | White Papers/Research Documents
A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation. An overview of the solution development is provided, followed by numerous examples of tool use and evaluation. The document concludes with an evaluation of the tool maturity level. The...
-
Gillespie CCM
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Greg Schoeppner CDM Hub
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Halpin-Tsai Micromechanics Model
13 May 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Halpin-Tsai Micromechanics Model
10 Oct 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Hubert McGill
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
13 May 2013 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
28 May 2014 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer Pro Software from Collier Research
28 May 2014 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Injection Overmolding Manufacturing Process Simulation
23 Jul 2014 | Online Presentations
Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries. The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...
-
Jack Gillespie CDM Hub
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Jacob Fish Columbia CDM Hub
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Jerry Young Boeing CDM Hub
31 Aug 2024 | Online Presentations | Contributor(s): SME Project