-
Injection Overmolding Manufacturing Process Simulation
29 Jun 2017 | Online Presentations
Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries. The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...
-
TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts
03 Jan 2017 | Downloads
This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...
-
TexGen4SC
14 Feb 2014 | Tools
Modeling of woven fabric composites generated by TexGen using SwiftComp
-
2015 cdmHUB Workshop
23 Jul 2014 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
14 Feb 2014 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
Skill of Using Surface Element in ANSYS
14 Feb 2014 | Downloads
Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...
-
CDM Hub Introduction
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
DiBenedetto Equation: Tg and DOC
23 Jul 2014 | Tools
DiBenedetto Equation: Glass Transition Temperature Dependence on Degree of Cure
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
31 Aug 2024 | Teaching Materials | Contributor(s): SME Project
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
23 Jul 2014 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
Composite Materials and Structures 1972-2012: Grand Challenges
23 Jul 2014 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
31 Aug 2024 | Series | Contributor(s): SME Project
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
Nanohub and the HUBzero Platform
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
The Challenge and Vision for cdmHUB
31 Aug 2024 | Online Presentations | Contributor(s): SME Project
Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop
-
Effective Lamina and Laminate Properties
14 Feb 2014 | Tools
Calculate effective lamina and laminate properties from phase properties and layup.
-
Halpin-Tsai Micromechanics Model
14 Feb 2014 | Tools
Calculate homogenized lamina properties from fiber and matrix properties