M3 – A Sustainable Approach to Vehicle Light-weighting with Composites: Methods – Materials – Manufacturing

07 Apr 2023 | Contributor(s): Johnathan Goodsell

The presentation will introduce our house of competence, KIT and Fraunhofer ICT and introduce our MMM approach to engineered lightweight solutions for specific industries. This comprises of the development of virtual process chains, material and manufacturing solutions for relevant technologies...

Master Laminates to Simplify Design, Manufacturing, and Testing of Composites

12 Dec 2022 | Contributor(s): Johnathan Goodsell

Composite materials and structures have traditionally been viewed as more complicated than metals. With master stiffness and failure envelopes composites are as simple as metals. Stiffness of laminates can be split into two part: one for trace that represents the total stiffness capacity; one for...

MSG-based Multiscale Modeling for Beams

05 Jul 2019 | Downloads | Contributor(s): Gerhard Klimeck

Presentation given in Summer 2019 at Wuhan University of Technology. 

Multiscale Modeling of Damage Mechanics of Fiber Reinforced Polymer Composites From Micro- to Macroscale: The (Virtual) Reality and Challenges Ahead

13 May 2022 | Online Presentations | Contributor(s): Johnathan Goodsell

Multi-scale modelling of composites is a very active topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large...

Novel Powder Epoxy Composites for Thick-Section Structures

25 Jan 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...

PostGEBT

15 Aug 2014 | Downloads | Contributor(s): Gerhard Klimeck

PostGEBT is a post-processing code which can effectively visualize mass data generated by the nonlinear beam solver GEBT. PostGEBT reads and visualizes the results produced by GEBT for static, steady-state, transient dynamic, and eigenvalue analyses. More details can be found in the PostGEBT...

Practical Developments in Multiscale Modeling of Composites

07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids

16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...

Rheology of Carbon Fiber Thermoplastic Polymer Composites

26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...

Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation

06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...

Sustainable Manufacturing of Composite Materials

21 May 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

The growing use of composite materials in aerospace, transportation, recreational products and renewable energy production manufacturing has created a critical need for low-cost sustainable manufacturing methods. The current methods of consolidation and cure are not compatible with the projected...

The Challenges of Determining the Strength of Composites

24 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell

Why are there such large differences in reported strengths of composites? Some of the reasons are the definition of strength, material variability, poor test methods, and subtle variations in carrying out the tests. But there are other important factors that affect strength that are not...

The Story of Permeability in Liquid Composite Molding (LCM): How to Devise and Validate Process Simulation Software?

13 Apr 2022 | Online Presentations | Contributor(s): Johnathan Goodsell

Permeability characterizes the capability of establishing a fluid flow through a porous medium. This lecture aims to present a summary on the state-of-the-art knowledge on permeability in LCM together with a discussion on open questions. The Story of Permeability in Liquid Composite Molding (LCM)...

US-COMP: Next Generation of Composites Materials for Crewed Deep Space Missions

15 Dec 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

Current state-of-the-art composite materials are not light/strong enough for crewed missions to Mars and beyond. Structural components of deep space vehicles require lighter/stronger materials for fuel efficiency. The NASA Space Technologies Research Institute (STRI) for Ultra-Strong Composites...