-
Rheology of Carbon Fiber Thermoplastic Polymer Composites
26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids
16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...
-
Novel Powder Epoxy Composites for Thick-Section Structures
25 Jan 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...
-
Emerging Role of Process Models & Simulations in Composites Manufacturing
07 Dec 2020 | Online Presentations | Contributor(s): Johnathan Goodsell
This talk will highlight the ever increasing benefits of process modeling in Composite Manufacturing processes. First, the use of science base approach of materials processing, which integrates material parameters with transport phenomena at various scales during manufacturing to create...
-
The Challenges of Determining the Strength of Composites
24 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell
Why are there such large differences in reported strengths of composites? Some of the reasons are the definition of strength, material variability, poor test methods, and subtle variations in carrying out the tests. But there are other important factors that affect strength that are not...
-
Automating the Lay-up of Geometrically Complex Composite Structures Made from Preimpregnated Reinforcements: a Route to a Roadmap
04 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell
A significant amount of research and industrial effort has been expended on the development of equipment such as automated fibre placement machines to lay-up prepregged reinforcements into structures of relatively simple geometry such as wing skins and spars, and fuselage structures. These...
-
Defect Coupling Predicting the Strength and Life of Fiberous Composite Laminates
16 Oct 2020 | Online Presentations | Contributor(s): Johnathan Goodsell
After more than 30 years of careful experimental investigation and exhaustive development of discrete damage analysis methods including integrated computational mechanics methods, our community knows a great deal about how discrete defects such as matrix cracks and defect growth (e.g....
-
Global Composites Experts Webinar Series
12 Aug 2020 | Series | Contributor(s): Johnathan Goodsell
The webinars examine the history, present capabilities, and future of composites science and technology. The goal of the series is to accumulate the vast knowledge of composites that has been developed over the past 50 years and to make it available to the global composites community. Each...
-
Woven fabrics UMAT- a coupled material model
02 Aug 2017 | Downloads | Contributor(s): Ali Roumani
One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...
-
Puck Failure Criteria
31 Jul 2017 | Downloads
Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...
-
Orthotropic Stress Concentration Factor
25 Sep 2014 | Tools
Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate
-
Demystifying Composites Simulation for Performance
22 Aug 2024 | Downloads | Contributor(s): Ali Roumani
The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation.
-
2015 cdmHUB Workshop
22 Aug 2024 | Series | Contributor(s): Ali Roumani
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
CATIA Composites Braiding
22 Aug 2024 | Animations | Contributor(s): Ali Roumani
A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
22 May 2013 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
25 Sep 2014 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
Plane-Stress Compliance Transform
25 Sep 2014 | Tools
Transforms 2D compliance terms by rotation about the 3-axis
-
Composite Materials and Structures 1972-2012: Grand Challenges
22 May 2013 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
22 May 2013 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.