Resources: Online Presentations

Select a tag (or keyword) from the list below to browse through available resources in that category.

Tag

Resources

Info

  • Select a resource to see details.

View more ›

Top Rated

  1. From Research to Applications

    14 Aug 2014 | Online Presentations | Contributor(s): Jacob Fish

    Professor Jacob Fish discusses composites simulation from research to applications at the May 2013 Composites Design and Manufacturing HUB workshop.

  2. Tool Vision: Overview

    14 Aug 2014 | Online Presentations | Contributor(s): Gerhard Klimeck

  3. Tool Vision: HUBzero Technology

    14 Aug 2014 | Online Presentations | Contributor(s): Gerhard Klimeck

  4. Nanophotonics with Metamaterials

    10 Sep 2014 | Online Presentations | Contributor(s): Vladimir M. Shalaev

    One of the most unique properties of light is that it can package information into a signal of zero mass and propagate it at the ultimate speed. It is, however, a daunting challenge to bring photonic devices to the nanometer scale because of the fundamental diffraction limit. Metamaterials can...

  5. Nanohub and the HUBzero Platform

    16 Aug 2014 | Online Presentations | Contributor(s): Michael McLennan

    Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.

  6. Simulation and Modeling: a Material Supplier Perspective

    14 Aug 2014 | Online Presentations | Contributor(s): Carmelo LoFaro

    Carmelo LoFaro discusses a material supplier perspective on the need for simulation and modeling at the May 2013 Composites Design and Manufacturing HUB workshop.

  7. Molding and Microstructure Simulation for Discontinuous-Fiber Composites

    14 Aug 2014 | Online Presentations | Contributor(s): Charles Tucker

    Professor Charles Tucker discusses Molding and Microstructure Simulation for Discontinuous-Fiber Composites at the May 2013 Composites Design and Manufacturing HUB workshop.

  8. The Challenge and Vision for cdmHUB

    14 Aug 2014 | Online Presentations | Contributor(s): Byron Pipes

    Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop

  9. Innovative Modeling and Simulation Technology Area

    19 Jun 2015 | Online Presentations | Contributor(s): Byron Pipes

    This is the presentation that Dr. Byron Pipes gave at the IACMI Inaugural Members meeting. It gives a bird view of the focus of Indiana Technology Area.

  10. Fundamentals of Composites Analysis - Part I

    29 Aug 2014 | Online Presentations | Contributor(s): Wenbin Yu

    Dr. Wenbin Yu discusses fundamentals of composites analysis, including methods for treating anisotropy and heterogeneity, at the 2014 Composites Design, Manufacturing and Analysis Workshop.