Resources: All

Find a resource
  1. compositesdesign x
  2. homogenization x
  3. beamtheory x
  4. compositesmanufacturing x
  1. Injection Overmolding Manufacturing Process Simulation

    29 Jun 2017 | Online Presentations

    Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries.  The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...

  2. VABS: Powering Simple Beam Elements with Detailed 3D FEA Fidelity

    06 Jan 2017 | Downloads

    This presentation gives a brief introduction to VABS, a general-purpose cross-sectional analysis, which can power conventional, simple beam elements with detailed 3D FEA fidelity. 

  3. TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts

    03 Jan 2017 | Downloads

    This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...

  4. TexGen4SC

    14 Feb 2014 | Tools

    Modeling of woven fabric composites generated by TexGen using SwiftComp

  5. 2015 cdmHUB Workshop

    23 Jul 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  6. 2015 cdmHUB Workshop

    23 Jul 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  7. 2015 cdmHUB Workshop

    14 Feb 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  8. Skill of Using Surface Element in ANSYS

    14 Feb 2014 | Downloads

    Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

  9. DiBenedetto Equation: Tg and DOC

    23 Jul 2014 | Tools

    DiBenedetto Equation: Glass Transition Temperature Dependence on Degree of Cure

  10. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    23 Jul 2014 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  11. Keith Kedward and Composites Design (Slides)

    23 Jul 2014 | Teaching Materials

    Professor Byron Pipes' slides from the 2014 ASC meeting at UCSD discussing Keith Kedward and Composites Design

  12. Keith Kedward and Composites Design (Recorded Talk)

    23 Jul 2014 | Teaching Materials

    Professor Byron Pipes speaks at the 2014 ASC Conference at UCSD in tribute to Keith Kedward on the subject of Composites Design.

  13. Composite Materials and Structures 1972-2012: Grand Challenges

    23 Jul 2014 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

  14. Composite Materials and Structures 1972-2012: Grand Challenges

    23 Jul 2014 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

  15. 2013 Composites Design and Manufacturing HUB Kickoff Workshop

    23 Jul 2014 | Series

    The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

  16. HyperSizer Pro Software from Collier Research

    23 Jul 2014 | Tool Information

    HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

  17. Effective Lamina and Laminate Properties

    14 Feb 2014 | Tools

    Calculate effective lamina and laminate properties from phase properties and layup.

  18. Halpin-Tsai Micromechanics Model

    14 Feb 2014 | Tools

    Calculate homogenized lamina properties from fiber and matrix properties