Resources: All

Find a resource
  1. homogenization x
  2. multiscalemodeling x
  3. beamtheory x
  4. compositestructures x
  1. Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites

    14 Nov 2022

    Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...

  2. Practical Developments in Multiscale Modeling of Composites

    07 Apr 2021

    Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

  3. MSC.Patran/Nastran-SwiftComp GUI

    01 Apr 2019

    A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

  4. VABS: Powering Simple Beam Elements with Detailed 3D FEA Fidelity

    06 Jan 2017

    This presentation gives a brief introduction to VABS, a general-purpose cross-sectional analysis, which can power conventional, simple beam elements with detailed 3D FEA fidelity. 

  5. TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts

    03 Jan 2017

    This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...

  6. TexGen4SC

    14 Feb 2014 | Tools

    Modeling of woven fabric composites generated by TexGen using SwiftComp

  7. A Unified Theory for Constitutive Modeling of Composites

    14 Aug 2014 | Publications

    A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...

  8. Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes

    28 May 2014 | Publications

    This is the Master thesis from Xin Liu in Prof Yu’s research group. In this thesis, the Mechanics of Structure Genome (MSG) has be used to provide an alternative way to model composite beam-like structures. Basic concept of MSG is introduced as well as the idea of how to carry out...

  9. 2015 cdmHUB Workshop

    28 May 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  10. 2015 cdmHUB Workshop

    14 Feb 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  11. HyperSizer for Composites: Insanely Fast Laminate Optimization

    28 May 2014 | Tool Information

    95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

  12. Skill of Using Surface Element in ANSYS

    14 Feb 2014 | Downloads

    Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

  13. Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

    28 May 2014 | Publications

    A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

  14. Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

    14 Aug 2014 | Publications

    A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

  15. Variational Asymptotic Modeling of Composite Dimensionally Reducible Structures

    28 May 2014 | Publications

    This is Prof. Yu's PhD dissertation. In this disseration, the variational asymptotic method has be used to provide a systematic, holistic, and rigorous approach to construct efficient yet accurate models for composite beams, plates, and shells.  

  16. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    28 May 2014 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  17. Composite Materials and Structures 1972-2012: Grand Challenges

    28 May 2014 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

  18. 2013 Composites Design and Manufacturing HUB Kickoff Workshop

    28 May 2014 | Series

    The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

  19. HyperSizer Pro Software from Collier Research

    28 May 2014 | Tool Information

    HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

  20. Effective Lamina and Laminate Properties

    14 Feb 2014 | Tools

    Calculate effective lamina and laminate properties from phase properties and layup.