Resources: All

Find a resource
  1. workshop x
  2. compositesdesign x
  3. simulation x
  1. Woven fabrics UMAT- a coupled material model

    02 Aug 2017 | Contributor(s): Ali Roumani

    One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

  2. 2016 cdmHUB ASC Workshop

    01 Sep 2016 | Series

    Join us at the American Society for Composites 31st Technical Conference (http://mech.utah.edu/ASC2016/) for a hands-on workshop, on September 18, from 7:00–9:00pm, on how to use cdmHUB.org for composites learning, teaching, and research in the cloud. With the mission to convene the...

  3. Demystifying Composites Simulation for Performance

    28 Jul 2016 | Downloads | Contributor(s): Ali Roumani

    The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation. 

  4. 2015 Composites Simulation Workshop Agenda

    05 Jan 2016 | Teaching Materials

    2015 Composites Simulation Workshop Agenda

  5. 2015 cdmHUB Workshop

    05 Jan 2016 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  6. 2015 cdmHUB Workshop

    05 Jan 2016 | Series | Contributor(s): Ali Roumani

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  7. CATIA Composites Braiding

    09 Mar 2015 | Animations | Contributor(s): Ali Roumani

    A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.

  8. Keith Kedward and Composites Design (Slides)

    22 Sep 2014 | Teaching Materials

    Professor Byron Pipes' slides from the 2014 ASC meeting at UCSD discussing Keith Kedward and Composites Design

  9. Keith Kedward and Composites Design (Recorded Talk)

    22 Sep 2014 | Teaching Materials

    Professor Byron Pipes speaks at the 2014 ASC Conference at UCSD in tribute to Keith Kedward on the subject of Composites Design.

  10. Composite Materials and Structures 1972-2012: Grand Challenges

    19 Sep 2014 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

  11. 2013 Composites Design and Manufacturing HUB Kickoff Workshop

    04 Sep 2014 | Series

    The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

  12. HyperSizer Pro Software from Collier Research

    20 Aug 2014 | Tool Information

    HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

  13. Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop

    27 Jun 2014 | Teaching Materials

    Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...