Resources: All

Find a resource
  1. compositemechanics x
  2. compositesanalysis x
  3. abaqus x
  4. cdmhub x
  5. compositeanalysis x
  1. Greg Schoeppner CDM Hub

    15 Feb 2019 | Contributor(s): SME Project

  2. Halpin-Tsai Micromechanics Model

    22 May 2013 | Tools

    Calculate homogenized lamina properties from fiber and matrix properties

  3. Hubert McGill

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

  4. HyperSizer Pro Software from Collier Research

    22 May 2013 | Tool Information

    HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

  5. Interlaminar Stresses in Symmetric Angle-Ply Laminates Subjected to Anticlastic Bending Deformation

    22 May 2013 | Tool Information

    The aim of the present work is to develop a solution for the interlaminar stress field in a symmetric and balanced,  angle-ply laminate subjected to anticlastic bending deformation.  Further, this class of problems is considered in order to elucidate the behavior of angle-ply laminates...

  6. Jack Gillespie CDM Hub

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

  7. Jacob Fish Columbia CDM Hub

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

  8. Jerry Young Boeing CDM Hub

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

  9. NAFEMS Invitation to Tender: How to Obtain Material Properties for Structural Analysis of Composites

    23 Jul 2014 | White Papers/Research Documents

    The NAFEMS Composites Working Group wishes to commission a new document with the suggested title "How to Obtain Material Properties for Structural Analysis of Composites". The book will be a companion volume to the existing NAFEMS publications "An introduction to the use of material models in...

  10. Nanohub and the HUBzero Platform

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

    Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.

  11. Orthotropic Stress Concentration Factor

    25 Sep 2014 | Tools

    Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate

  12. Ove Schuett Dassault Systemes Americas CDM Hub

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

  13. Pascal Hubert CDM Hub

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

  14. Plane-Stress Compliance Transform

    25 Sep 2014 | Tools

    Transforms 2D compliance terms by rotation about the 3-axis

  15. Poursartip UBC

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

  16. Puck Failure Criteria

    27 May 2015 | Downloads

    Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

  17. Puck Failure Criteria

    22 May 2013 | Downloads

    Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

  18. Schoeppner AFRL

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.

  19. Schuett Dassault

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

  20. The Challenge and Vision for cdmHUB

    02 Aug 2024 | Online Presentations | Contributor(s): SME Project

    Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop