-
DiBenedetto Equation: Tg and DOC
23 Jul 2014 | Tools
DiBenedetto Equation: Glass Transition Temperature Dependence on Degree of Cure
-
Effective Lamina and Laminate Properties
13 May 2013 | Tools
Calculate effective lamina and laminate properties from phase properties and layup.
-
Free Edge Elasticity Solution
13 May 2013 | Tools
Simulate stress, strain and displacements in an composite angle-ply laminate subjected to uniform axial extension, anticlastic curvature and thermoelastic deformation.
-
Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation
13 May 2013 | White Papers/Research Documents
A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation. An overview of the solution development is provided, followed by numerous examples of tool use and evaluation. The document concludes with an evaluation of the tool maturity level. The...
-
Gillespie CCM
26 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Greg Schoeppner CDM Hub
26 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Halpin-Tsai Micromechanics Model
13 May 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Hubert McGill
26 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
13 May 2013 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
28 May 2014 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer Pro Software from Collier Research
28 May 2014 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Injection Overmolding Manufacturing Process Simulation
23 Jul 2014 | Online Presentations
Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries. The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...
-
Jack Gillespie CDM Hub
26 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Jacob Fish Columbia CDM Hub
26 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Jerry Young Boeing CDM Hub
26 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
MSC.Patran/Nastran-SwiftComp GUI
01 Apr 2019 | Downloads
A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...
-
Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome
23 Jan 2019 | Publications
The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...
-
Nanohub and the HUBzero Platform
16 Aug 2014 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Ove Schuett Dassault Systemes Americas CDM Hub
18 Jul 2019 | Online Presentations | Contributor(s): SME Project
-
Pascal Hubert CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project