-
Fiber-Optic-Based In-Process Monitoring of CFRP Structures for Material Quality Assurance
27 Jan 2022 | Contributor(s): Johnathan Goodsell
Although carbon fiber reinforced polymer (CFRP) composites have been used extensively in many aerospace structures such as Boeing 787 and Airbus 350, low-cost and high-rate production CFRP are highly demanded for next-generation single-aisle commercial aircraft. Competition has been increasing...
-
Fibrous Shell Approach and 3D Second Gradient Modeling for Textile Composite Draping
10 Dec 2021 | Contributor(s): Johnathan Goodsell
Composite manufacturing processes are often complex and process simulation is a way to avoid costly trial-anderror development. Simulations of composites textile reinforcements draping use shell finite elements for which the bending behavior is very particular. The fibrous composition of the...
-
Global Composites Experts Webinar Series
12 Aug 2020 | Series | Contributor(s): Johnathan Goodsell
The webinars examine the history, present capabilities, and future of composites science and technology. The goal of the series is to accumulate the vast knowledge of composites that has been developed over the past 50 years and to make it available to the global composites community. Each...
-
Imparting Robustness to Out-of-Autoclave Prepregs
09 Mar 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
Autoclaves have long been used to ensure robustness in the production of composite parts. However, they present a production bottleneck, as well as high capital and recurring costs. Out-of-autoclave prepregs were introduced to allow oven curing and thereby address some of these issues. These OoA...
-
Injection Overmolding Manufacturing Process Simulation
29 Jun 2017 | Online Presentations
Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries. The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...
-
M3 – A Sustainable Approach to Vehicle Light-weighting with Composites: Methods – Materials – Manufacturing
07 Apr 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
The presentation will introduce our house of competence, KIT and Fraunhofer ICT and introduce our MMM approach to engineered lightweight solutions for specific industries. This comprises of the development of virtual process chains, material and manufacturing solutions for relevant technologies...
-
Master Laminates to Simplify Design, Manufacturing, and Testing of Composites
12 Dec 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Composite materials and structures have traditionally been viewed as more complicated than metals. With master stiffness and failure envelopes composites are as simple as metals. Stiffness of laminates can be split into two part: one for trace that represents the total stiffness capacity; one for...
-
MSC.Patran/Nastran-SwiftComp GUI
01 Apr 2019 | Downloads
A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...
-
Multiscale Modeling of Damage Mechanics of Fiber Reinforced Polymer Composites From Micro- to Macroscale: The (Virtual) Reality and Challenges Ahead
13 May 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Multi-scale modelling of composites is a very active topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large...
-
Novel Powder Epoxy Composites for Thick-Section Structures
25 Jan 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...
-
Orthotropic Stress Concentration Factor
25 Sep 2014 | Tools
Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate
-
Plane-Stress Compliance Transform
25 Sep 2014 | Tools
Transforms 2D compliance terms by rotation about the 3-axis
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids
16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...
-
Rheology of Carbon Fiber Thermoplastic Polymer Composites
26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...
-
Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation
06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...
-
Sustainable Manufacturing of Composite Materials
21 May 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The growing use of composite materials in aerospace, transportation, recreational products and renewable energy production manufacturing has created a critical need for low-cost sustainable manufacturing methods. The current methods of consolidation and cure are not compatible with the projected...
-
The Challenges of Determining the Strength of Composites
24 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell
Why are there such large differences in reported strengths of composites? Some of the reasons are the definition of strength, material variability, poor test methods, and subtle variations in carrying out the tests. But there are other important factors that affect strength that are not...
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
08 Oct 2014 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
08 Oct 2014 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.