-
Fiber Orientation Prediction for Discontinuous Fiber Composites: Fundamentals and Future Trends
08 Feb 2023 | Contributor(s): Johnathan Goodsell
When composite materials with discontinuous fibers are processed into their final shape, any flow alters the fiber orientation pattern and affects the properties of the final composite. It is now standard practice to predict fiber orientation patterns and the resulting mechanical properties in...
-
Fiber-Optic-Based In-Process Monitoring of CFRP Structures for Material Quality Assurance
27 Jan 2022 | Contributor(s): Johnathan Goodsell
Although carbon fiber reinforced polymer (CFRP) composites have been used extensively in many aerospace structures such as Boeing 787 and Airbus 350, low-cost and high-rate production CFRP are highly demanded for next-generation single-aisle commercial aircraft. Competition has been increasing...
-
Fibrous Shell Approach and 3D Second Gradient Modeling for Textile Composite Draping
10 Dec 2021 | Contributor(s): Johnathan Goodsell
Composite manufacturing processes are often complex and process simulation is a way to avoid costly trial-anderror development. Simulations of composites textile reinforcements draping use shell finite elements for which the bending behavior is very particular. The fibrous composition of the...
-
Forming simulation using PAM-FORM, AniForm, LS-DYNA, and ABAQUS
18 Jul 2017
-
Global Composites Experts Webinar Series
12 Aug 2020 | Series | Contributor(s): Johnathan Goodsell
The webinars examine the history, present capabilities, and future of composites science and technology. The goal of the series is to accumulate the vast knowledge of composites that has been developed over the past 50 years and to make it available to the global composites community. Each...
-
Halpin-Tsai Micromechanics Model
14 Feb 2014 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Imparting Robustness to Out-of-Autoclave Prepregs
09 Mar 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
Autoclaves have long been used to ensure robustness in the production of composite parts. However, they present a production bottleneck, as well as high capital and recurring costs. Out-of-autoclave prepregs were introduced to allow oven curing and thereby address some of these issues. These OoA...
-
M3 – A Sustainable Approach to Vehicle Light-weighting with Composites: Methods – Materials – Manufacturing
07 Apr 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
The presentation will introduce our house of competence, KIT and Fraunhofer ICT and introduce our MMM approach to engineered lightweight solutions for specific industries. This comprises of the development of virtual process chains, material and manufacturing solutions for relevant technologies...
-
Master Laminates to Simplify Design, Manufacturing, and Testing of Composites
12 Dec 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Composite materials and structures have traditionally been viewed as more complicated than metals. With master stiffness and failure envelopes composites are as simple as metals. Stiffness of laminates can be split into two part: one for trace that represents the total stiffness capacity; one for...
-
MSC.Patran/Nastran-SwiftComp GUI
01 Apr 2019 | Downloads
A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...
-
Multiscale Modeling of Damage Mechanics of Fiber Reinforced Polymer Composites From Micro- to Macroscale: The (Virtual) Reality and Challenges Ahead
13 May 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Multi-scale modelling of composites is a very active topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large...
-
NAFEMS Invitation to Tender: How to Obtain Material Properties for Structural Analysis of Composites
13 Feb 2015 | White Papers/Research Documents
The NAFEMS Composites Working Group wishes to commission a new document with the suggested title "How to Obtain Material Properties for Structural Analysis of Composites". The book will be a companion volume to the existing NAFEMS publications "An introduction to the use of material models in...
-
Novel Powder Epoxy Composites for Thick-Section Structures
25 Jan 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Puck Failure Criteria
31 Jul 2017 | Downloads
Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...
-
Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids
16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...
-
Rheology of Carbon Fiber Thermoplastic Polymer Composites
26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...
-
Skill of Using Surface Element in ANSYS
26 Mar 2015 | Downloads
Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...
-
Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation
06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...