-
Effective Lamina and Laminate Properties
13 May 2013 | Tools
Calculate effective lamina and laminate properties from phase properties and layup.
-
Free Edge Elasticity Solution
22 May 2013 | Tools
Simulate stress, strain and displacements in an composite angle-ply laminate subjected to uniform axial extension, anticlastic curvature and thermoelastic deformation.
-
Free Edge Elasticity Solution
13 May 2013 | Tools
Simulate stress, strain and displacements in an composite angle-ply laminate subjected to uniform axial extension, anticlastic curvature and thermoelastic deformation.
-
Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation
22 May 2013 | White Papers/Research Documents
A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation. An overview of the solution development is provided, followed by numerous examples of tool use and evaluation. The document concludes with an evaluation of the tool maturity level. The...
-
Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation
13 May 2013 | White Papers/Research Documents
A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation. An overview of the solution development is provided, followed by numerous examples of tool use and evaluation. The document concludes with an evaluation of the tool maturity level. The...
-
Gillespie CCM
24 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Greg Schoeppner CDM Hub
24 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Halpin-Tsai Micromechanics Model
22 May 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Halpin-Tsai Micromechanics Model
13 May 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Hubert McGill
24 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
13 May 2013 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer Pro Software from Collier Research
22 May 2013 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Interlaminar Stresses in Symmetric Angle-Ply Laminates Subjected to Anticlastic Bending Deformation
22 May 2013 | Tool Information
The aim of the present work is to develop a solution for the interlaminar stress field in a symmetric and balanced, angle-ply laminate subjected to anticlastic bending deformation. Further, this class of problems is considered in order to elucidate the behavior of angle-ply laminates...
-
Jack Gillespie CDM Hub
24 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Jacob Fish Columbia CDM Hub
24 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Jerry Young Boeing CDM Hub
24 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome
23 Jan 2019 | Publications
The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...
-
NAFEMS Invitation to Tender: How to Obtain Material Properties for Structural Analysis of Composites
13 Feb 2015 | White Papers/Research Documents
The NAFEMS Composites Working Group wishes to commission a new document with the suggested title "How to Obtain Material Properties for Structural Analysis of Composites". The book will be a companion volume to the existing NAFEMS publications "An introduction to the use of material models in...
-
Nanohub and the HUBzero Platform
16 Aug 2014 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Ove Schuett Dassault Systemes Americas CDM Hub
18 Jul 2019 | Online Presentations | Contributor(s): SME Project