Jacob Fish Columbia CDM Hub

15 Feb 2019 | Contributor(s): SME Project

Jerry Young Boeing CDM Hub

15 Feb 2019 | Contributor(s): SME Project

M3 – A Sustainable Approach to Vehicle Light-weighting with Composites: Methods – Materials – Manufacturing

07 Apr 2023 | Contributor(s): Johnathan Goodsell

The presentation will introduce our house of competence, KIT and Fraunhofer ICT and introduce our MMM approach to engineered lightweight solutions for specific industries. This comprises of the development of virtual process chains, material and manufacturing solutions for relevant technologies...

Master Laminates to Simplify Design, Manufacturing, and Testing of Composites

12 Dec 2022 | Contributor(s): Johnathan Goodsell

Composite materials and structures have traditionally been viewed as more complicated than metals. With master stiffness and failure envelopes composites are as simple as metals. Stiffness of laminates can be split into two part: one for trace that represents the total stiffness capacity; one for...

Multiscale Modeling of Damage Mechanics of Fiber Reinforced Polymer Composites From Micro- to Macroscale: The (Virtual) Reality and Challenges Ahead

13 May 2022 | Contributor(s): Johnathan Goodsell

Multi-scale modelling of composites is a very active topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large...

NAFEMS Invitation to Tender: How to Obtain Material Properties for Structural Analysis of Composites

13 Feb 2015

The NAFEMS Composites Working Group wishes to commission a new document with the suggested title "How to Obtain Material Properties for Structural Analysis of Composites". The book will be a companion volume to the existing NAFEMS publications "An introduction to the use of material models in...

Nanohub and the HUBzero Platform

16 Aug 2014 | Online Presentations | Contributor(s): SME Project

Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.

Novel Powder Epoxy Composites for Thick-Section Structures

25 Jan 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...

Ove Schuett Dassault Systemes Americas CDM Hub

18 Jul 2019 | Online Presentations | Contributor(s): SME Project

Pascal Hubert CDM Hub

15 Feb 2019 | Online Presentations | Contributor(s): SME Project

Poursartip UBC

15 Feb 2019 | Online Presentations | Contributor(s): SME Project

Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

Practical Developments in Multiscale Modeling of Composites

07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids

16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...

Rheology of Carbon Fiber Thermoplastic Polymer Composites

26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...

Schoeppner AFRL

15 Feb 2019 | Online Presentations | Contributor(s): SME Project

Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.

Schuett Dassault

15 Feb 2019 | Online Presentations | Contributor(s): SME Project

Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation

06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...

Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

29 Nov 2014 | Publications

A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

Sustainable Manufacturing of Composite Materials

21 May 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

The growing use of composite materials in aerospace, transportation, recreational products and renewable energy production manufacturing has created a critical need for low-cost sustainable manufacturing methods. The current methods of consolidation and cure are not compatible with the projected...

The Challenge and Vision for cdmHUB

14 Aug 2014 | Online Presentations | Contributor(s): SME Project

Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop