-
Jerry Young Boeing CDM Hub
15 Feb 2019 | Contributor(s): SME Project
-
M3 – A Sustainable Approach to Vehicle Light-weighting with Composites: Methods – Materials – Manufacturing
07 Apr 2023 | Contributor(s): Johnathan Goodsell
The presentation will introduce our house of competence, KIT and Fraunhofer ICT and introduce our MMM approach to engineered lightweight solutions for specific industries. This comprises of the development of virtual process chains, material and manufacturing solutions for relevant technologies...
-
Master Laminates to Simplify Design, Manufacturing, and Testing of Composites
12 Dec 2022 | Contributor(s): Johnathan Goodsell
Composite materials and structures have traditionally been viewed as more complicated than metals. With master stiffness and failure envelopes composites are as simple as metals. Stiffness of laminates can be split into two part: one for trace that represents the total stiffness capacity; one for...
-
Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome
23 Jan 2019
The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...
-
Multiscale Modeling of Damage Mechanics of Fiber Reinforced Polymer Composites From Micro- to Macroscale: The (Virtual) Reality and Challenges Ahead
13 May 2022 | Contributor(s): Johnathan Goodsell
Multi-scale modelling of composites is a very active topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large...
-
Nanohub and the HUBzero Platform
16 Aug 2014 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Novel Powder Epoxy Composites for Thick-Section Structures
25 Jan 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...
-
Ove Schuett Dassault Systemes Americas CDM Hub
18 Jul 2019 | Online Presentations | Contributor(s): SME Project
-
Pascal Hubert CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Poursartip UBC
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids
16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...
-
Rheology of Carbon Fiber Thermoplastic Polymer Composites
26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...
-
Schoeppner AFRL
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Schuett Dassault
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation
06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...
-
Sustainable Manufacturing of Composite Materials
21 May 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The growing use of composite materials in aerospace, transportation, recreational products and renewable energy production manufacturing has created a critical need for low-cost sustainable manufacturing methods. The current methods of consolidation and cure are not compatible with the projected...
-
TexGen4SC
13 May 2013 | Tools
Modeling of woven fabric composites generated by TexGen using SwiftComp
-
The Challenge and Vision for cdmHUB
15 Aug 2024 | Online Presentations | Contributor(s): SME Project
Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop
-
The Challenge and Vision for cdmHUB
15 Aug 2024 | Online Presentations | Contributor(s): SME Project