-
Mechanics of Structure Genome:Fill the Gap between Materials Genome and Structural Analysis
18 May 2016
This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation.
-
Mechanics of Structure Genome: Reproduce 3D FEA Using Simple Structural Models for Aero Structures
10 Sep 2015
This presentation is an extended lecture delivered to the Boeing FEA Community of Excellence on Sept 10th.The Mechanics of Structure Genome (MSG) has been recently developed at Purdue with the promise to revolutionize the analysis of composite structures. MSG can reproduce 3D FEA using simple...
-
Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome
23 Jan 2019
The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...
-
Multiscale Modeling of Damage Mechanics of Fiber Reinforced Polymer Composites From Micro- to Macroscale: The (Virtual) Reality and Challenges Ahead
13 May 2022 | Contributor(s): Johnathan Goodsell
Multi-scale modelling of composites is a very active topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large...
-
NAFEMS Invitation to Tender: How to Obtain Material Properties for Structural Analysis of Composites
13 Feb 2015
The NAFEMS Composites Working Group wishes to commission a new document with the suggested title "How to Obtain Material Properties for Structural Analysis of Composites". The book will be a companion volume to the existing NAFEMS publications "An introduction to the use of material models in...
-
Nanohub and the HUBzero Platform
16 Aug 2014 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Novel Powder Epoxy Composites for Thick-Section Structures
25 Jan 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...
-
Orthotropic Stress Concentration Factor
25 Sep 2014 | Tools
Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate
-
Ove Schuett Dassault Systemes Americas CDM Hub
19 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Pascal Hubert CDM Hub
19 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Plane-Stress Compliance Transform
25 Sep 2014 | Tools
Transforms 2D compliance terms by rotation about the 3-axis
-
Poursartip UBC
19 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids
16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...
-
Rheology of Carbon Fiber Thermoplastic Polymer Composites
26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...
-
Schoeppner AFRL
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Schuett Dassault
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation
06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...
-
Structure Genome: Fill the Gap between Materials Genome and Structural Analysis
06 Jan 2015 | Online Presentations
This presentation is given at 2015 AIAA SciTech conference. A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs...
-
Sustainable Manufacturing of Composite Materials
21 May 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The growing use of composite materials in aerospace, transportation, recreational products and renewable energy production manufacturing has created a critical need for low-cost sustainable manufacturing methods. The current methods of consolidation and cure are not compatible with the projected...