New Developments in Platelet Composite Rheology

15 Feb 2023 | Contributor(s): Xuan Wang

New Developments in Platelet Meso-scale Measurements

15 Feb 2023 | Contributor(s): Xuan Wang

Novel Powder Epoxy Composites for Thick-Section Structures

25 Jan 2021 | Contributor(s): Johnathan Goodsell

This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...

Practical Developments in Multiscale Modeling of Composites

07 Apr 2021 | Contributor(s): Johnathan Goodsell

Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

Puck Failure Criteria

31 Jul 2017

Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids

16 Feb 2021 | Contributor(s): Johnathan Goodsell

In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...

Rheology of Carbon Fiber Thermoplastic Polymer Composites

26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...

Skill of Using Surface Element in ANSYS

26 Mar 2015 | Downloads

Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

State of the Art of Rheology of Concentrated Suspensions

14 Feb 2023 | Online Presentations | Contributor(s): Xuan Wang

Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation

06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...

Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

29 Nov 2014 | Publications

A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

Sustainable Manufacturing of Composite Materials

21 May 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

The growing use of composite materials in aerospace, transportation, recreational products and renewable energy production manufacturing has created a critical need for low-cost sustainable manufacturing methods. The current methods of consolidation and cure are not compatible with the projected...

TexGen4SC

14 Feb 2014 | Tools

Modeling of woven fabric composites generated by TexGen using SwiftComp

TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts

14 Feb 2014 | Downloads

This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...

The Challenges of Determining the Strength of Composites

24 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell

Why are there such large differences in reported strengths of composites? Some of the reasons are the definition of strength, material variability, poor test methods, and subtle variations in carrying out the tests. But there are other important factors that affect strength that are not...

The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

08 Oct 2014 | Teaching Materials

The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

08 Oct 2014 | Teaching Materials

The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

The Story of Permeability in Liquid Composite Molding (LCM): How to Devise and Validate Process Simulation Software?

13 Apr 2022 | Online Presentations | Contributor(s): Johnathan Goodsell

Permeability characterizes the capability of establishing a fluid flow through a porous medium. This lecture aims to present a summary on the state-of-the-art knowledge on permeability in LCM together with a discussion on open questions. The Story of Permeability in Liquid Composite Molding (LCM)...

US-COMP: Next Generation of Composites Materials for Crewed Deep Space Missions

15 Dec 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

Current state-of-the-art composite materials are not light/strong enough for crewed missions to Mars and beyond. Structural components of deep space vehicles require lighter/stronger materials for fuel efficiency. The NASA Space Technologies Research Institute (STRI) for Ultra-Strong Composites...

Variational Asymptotic Modeling of Composite Dimensionally Reducible Structures

09 Nov 2014 | Publications

This is Prof. Yu's PhD dissertation. In this disseration, the variational asymptotic method has be used to provide a systematic, holistic, and rigorous approach to construct efficient yet accurate models for composite beams, plates, and shells.