-
Pascal Hubert CDM Hub
15 Feb 2019 | Contributor(s): SME Project
-
Plane-Stress Compliance Transform
25 Sep 2014 | Tools
Transforms 2D compliance terms by rotation about the 3-axis
-
Poursartip UBC
21 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids
16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...
-
Rheology of Carbon Fiber Thermoplastic Polymer Composites
26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...
-
Schoeppner AFRL
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Schuett Dassault
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation
06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...
-
Structure Genome: Fill the Gap between Materials Genome and Structural Analysis
29 Nov 2014 | Publications
A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...
-
Sustainable Manufacturing of Composite Materials
21 May 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
The growing use of composite materials in aerospace, transportation, recreational products and renewable energy production manufacturing has created a critical need for low-cost sustainable manufacturing methods. The current methods of consolidation and cure are not compatible with the projected...
-
The Challenge and Vision for cdmHUB
14 Aug 2014 | Online Presentations | Contributor(s): SME Project
Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop
-
The Challenge and Vision for cdmHUB
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
The Challenges of Determining the Strength of Composites
24 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell
Why are there such large differences in reported strengths of composites? Some of the reasons are the definition of strength, material variability, poor test methods, and subtle variations in carrying out the tests. But there are other important factors that affect strength that are not...
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
08 Oct 2014 | Teaching Materials | Contributor(s): SME Project
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
08 Oct 2014 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
The Story of Permeability in Liquid Composite Molding (LCM): How to Devise and Validate Process Simulation Software?
13 Apr 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Permeability characterizes the capability of establishing a fluid flow through a porous medium. This lecture aims to present a summary on the state-of-the-art knowledge on permeability in LCM together with a discussion on open questions. The Story of Permeability in Liquid Composite Molding (LCM)...
-
US-COMP: Next Generation of Composites Materials for Crewed Deep Space Missions
15 Dec 2023 | Online Presentations | Contributor(s): Johnathan Goodsell
Current state-of-the-art composite materials are not light/strong enough for crewed missions to Mars and beyond. Structural components of deep space vehicles require lighter/stronger materials for fuel efficiency. The NASA Space Technologies Research Institute (STRI) for Ultra-Strong Composites...
-
Young Boeing
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop