2013 Composites Design and Manufacturing HUB Kickoff Workshop

04 Sep 2014 | Series

The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

2015 cdmHUB Workshop

05 Jan 2016 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

A Critical Assessment of Computer Tools for Calculating Composites Wind Turbine Blade Properties

16 Mar 2015 | Publications | Contributor(s): Nikki Huang

The purpose of this paper is to critically assess several computer tools for calculating the inertial and structural properties of wind turbine blades. The theoretical foundation of each tool is briefly summarized, and the advantages and disadvantages of each tool are pointed out. Several...

ABAQUS-VABS GUI

29 Jun 2015 | Downloads | Contributor(s): Nikki Huang

A Python script used to convert the input file generated by ABAQUS for VABS, a detailed step-by-step instruction using ABAQUS CAE to generate a simple beam section (composite anisotropic pipe)  is also given. Python scripts for generating more complex sections such as real...

Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop

27 Jun 2014 | Teaching Materials

Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...

ANSYS-VABS Graphic User Interface (GUI)

03 Aug 2015 | Downloads | Contributor(s): Nikki Huang

This resource contains the release package of ANSYS-VABS GUI.VABS code is NOT included. Manual and the source scripts for the interface can be found in the Supporting Documents.This GUI was developed based on ANSYS Release...

Classical Laminate Plate Theory

22 May 2013 | Tools

Prediction of stresses and strains in a laminated plate of infinite in-plane dimensions. Allows for application of thermal and edge loads.

Composite Materials and Structures 1972-2012: Grand Challenges

22 May 2013 | Teaching Materials

Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

Composite Stiffness Property Prediction

10 Oct 2013 | Downloads

Micromechanical models for the composite axial tensile, transverse tensile, and axial shear are combined into one tool with the objective of comparing their effectiveness as property prediction methods.  Rule of mixtures models (ROM) and the composite cylinder model (CCM) results for...

Computational evaluation of effective stress relaxation behavior of polymer composites

10 Oct 2013 | Publications

This paper presents a micromechanics model to characterize the effective stress relaxationstiffness of polymer composites. The linear viscoelastic behavior of polymer material wasmodeled by hereditary integral. The proposed model was established based on thevariational asymptotic method for unit...

Effective Lamina and Laminate Properties

22 May 2013 | Tools

Calculate effective lamina and laminate properties from phase properties and layup.

Effective Lamina and Laminate Properties

10 Oct 2013 | Tools

Calculate effective lamina and laminate properties from phase properties and layup.

Finite element unit cell model based on ABAQUS for fiber reinforced composites

10 Oct 2013 | Downloads

Free Edge Elasticity Solution

22 May 2013 | Tools

Simulate stress, strain and displacements in an composite angle-ply laminate subjected to uniform axial extension, anticlastic curvature and thermoelastic deformation.

Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation

22 May 2013 | White Papers/Research Documents

A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation.  An overview of the solution development is provided, followed by numerous examples of tool use and evaluation.  The document concludes with an evaluation of the tool maturity level.  The...

Halpin-Tsai Micromechanics Model

22 May 2013 | Tools

Calculate homogenized lamina properties from fiber and matrix properties

Halpin-Tsai Micromechanics Model

10 Oct 2013 | Tools

Calculate homogenized lamina properties from fiber and matrix properties

HyperSizer Pro Software from Collier Research

22 May 2013 | Tool Information

HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

Interlaminar Stresses in Symmetric Angle-Ply Laminates Subjected to Anticlastic Bending Deformation

22 May 2013 | Tool Information

The aim of the present work is to develop a solution for the interlaminar stress field in a symmetric and balanced,  angle-ply laminate subjected to anticlastic bending deformation.  Further, this class of problems is considered in order to elucidate the behavior of angle-ply laminates...

iVABS

19 Nov 2020 | Downloads | Contributor(s): Nikki Huang

iVABS (namely integrated VABS), is a design framework for composite slender structures (also called composite beams) such as helicopter rotor blades, wind turbine blades, high aspect ratio wings, bridges, shafts, etc. This framework bundles PreVABS, VABS, GEBT, Dakota, along with msgpi for...