-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series | Contributor(s): Ali Roumani
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop
27 Jun 2014 | Teaching Materials
Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...
-
CATIA Composites Braiding
09 Mar 2015 | Animations | Contributor(s): Ali Roumani
A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.
-
Classical Laminate Plate Theory
22 May 2013 | Tools
Prediction of stresses and strains in a laminated plate of infinite in-plane dimensions. Allows for application of thermal and edge loads.
-
Composite Materials and Structures 1972-2012: Grand Challenges
22 May 2013 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
Demystifying Composites Simulation for Performance
29 Aug 2024 | Downloads | Contributor(s): Ali Roumani
The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation.
-
Effective Lamina and Laminate Properties
22 May 2013 | Tools
Calculate effective lamina and laminate properties from phase properties and layup.
-
Effective Lamina and Laminate Properties
14 Feb 2014 | Tools
Calculate effective lamina and laminate properties from phase properties and layup.
-
Free Edge Elasticity Solution
22 May 2013 | Tools
Simulate stress, strain and displacements in an composite angle-ply laminate subjected to uniform axial extension, anticlastic curvature and thermoelastic deformation.
-
Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation
22 May 2013 | White Papers/Research Documents
A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation. An overview of the solution development is provided, followed by numerous examples of tool use and evaluation. The document concludes with an evaluation of the tool maturity level. The...
-
Halpin-Tsai Micromechanics Model
22 May 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Halpin-Tsai Micromechanics Model
14 Feb 2014 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
HyperSizer Pro Software from Collier Research
22 May 2013 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Interlaminar Stresses in Symmetric Angle-Ply Laminates Subjected to Anticlastic Bending Deformation
22 May 2013 | Tool Information
The aim of the present work is to develop a solution for the interlaminar stress field in a symmetric and balanced, angle-ply laminate subjected to anticlastic bending deformation. Further, this class of problems is considered in order to elucidate the behavior of angle-ply laminates...
-
Puck Failure Criteria
22 May 2013 | Downloads
Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...
-
Skill of Using Surface Element in ANSYS
14 Feb 2014 | Downloads
Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...
-
TexGen4SC
14 Feb 2014 | Tools
Modeling of woven fabric composites generated by TexGen using SwiftComp
-
TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts
14 Feb 2014 | Downloads
This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...