Resources: All

Find a resource
  1. composites x
  2. compositesmanufacturing x
  3. compositesdesign x
  4. compositeanalysis x
  1. Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation

    22 May 2014 | White Papers/Research Documents

    A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation.  An overview of the solution development is provided, followed by numerous examples of tool use and evaluation.  The document concludes with an evaluation of the tool maturity level.  The...

  2. Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation

    22 May 2014 | White Papers/Research Documents

    A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation.  An overview of the solution development is provided, followed by numerous examples of tool use and evaluation.  The document concludes with an evaluation of the tool maturity level.  The...

  3. Halpin-Tsai Micromechanics Model

    22 May 2013 | Tools

    Calculate homogenized lamina properties from fiber and matrix properties

  4. Halpin-Tsai Micromechanics Model

    13 May 2013 | Tools

    Calculate homogenized lamina properties from fiber and matrix properties

  5. HyperSizer for Composites: Insanely Fast Laminate Optimization

    13 May 2013 | Tool Information

    95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

  6. HyperSizer Pro Software from Collier Research

    22 May 2013 | Tool Information

    HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

  7. HyperSizer Pro Software from Collier Research

    23 Jul 2014 | Tool Information

    HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

  8. Injection Overmolding Manufacturing Process Simulation

    23 Jul 2014 | Online Presentations

    Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries.  The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...

  9. Interlaminar Stresses in Symmetric Angle-Ply Laminates Subjected to Anticlastic Bending Deformation

    22 May 2013 | Tool Information

    The aim of the present work is to develop a solution for the interlaminar stress field in a symmetric and balanced,  angle-ply laminate subjected to anticlastic bending deformation.  Further, this class of problems is considered in order to elucidate the behavior of angle-ply laminates...

  10. Keith Kedward and Composites Design (Recorded Talk)

    23 Jul 2014 | Teaching Materials

    Professor Byron Pipes speaks at the 2014 ASC Conference at UCSD in tribute to Keith Kedward on the subject of Composites Design.

  11. Keith Kedward and Composites Design (Slides)

    23 Jul 2014 | Teaching Materials

    Professor Byron Pipes' slides from the 2014 ASC meeting at UCSD discussing Keith Kedward and Composites Design

  12. Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome

    23 Jan 2019 | Publications

    The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...

  13. Puck Failure Criteria

    31 Jul 2017 | Downloads

    Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

  14. TexGen4SC

    13 May 2013 | Tools

    Modeling of woven fabric composites generated by TexGen using SwiftComp

  15. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    22 May 2013 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  16. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    13 May 2013 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  17. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    23 Jul 2014 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  18. Viscoelastic Shear Lag

    13 May 2013 | Tools

    Simulate the creep and stress relaxation of a uni-directional short-fiber composite.