-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
A Semi-Discrete Model for Progressive Damage and Failure of Fiber Reinforced Laminates
15 Nov 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
High-strength and high-stiffness carbon fiber-reinforced polymer composite laminates (CFRP) are being increasingly used for primary load bearing structures in many industries. The most common material system used is based on thermoset resins (matrix material), which come in the form of convenient...
-
Abaqus plugins for Nonlinear Acoustics
06 Jul 2017 | Downloads
This paper introduces generalized tools in the form of plugins for a commonly used commercial finite element package Abaqus/Standard to model the nonlinear acoustic methods for detection of delamination damage in composite laminates. The nonlinear acoustic methods typically involve exciting a...
-
ABAQUS-SwiftComp GUI
19 May 2016 | Downloads
This resource contains the download of the release package of ABAQUS-SwiftComp GUI. Please be advised that what you download is the GUI only, you have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...
-
ABAQUS-VABS GUI
29 Jun 2015 | Downloads
A Python script used to convert the input file generated by ABAQUS for VABS, a detailed step-by-step instruction using ABAQUS CAE to generate a simple beam section (composite anisotropic pipe) is also given. Python scripts for generating more complex sections such as real...
-
Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites
14 Nov 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...
-
Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes
18 Apr 2016 | Publications
This is the Master thesis from Xin Liu in Prof Yu’s research group. In this thesis, the Mechanics of Structure Genome (MSG) has be used to provide an alternative way to model composite beam-like structures. Basic concept of MSG is introduced as well as the idea of how to carry out...
-
Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop
27 Jun 2014 | Teaching Materials
Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...
-
Automating the Lay-up of Geometrically Complex Composite Structures Made from Preimpregnated Reinforcements: a Route to a Roadmap
04 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell
A significant amount of research and industrial effort has been expended on the development of equipment such as automated fibre placement machines to lay-up prepregged reinforcements into structures of relatively simple geometry such as wing skins and spars, and fuselage structures. These...
-
Bottom-up Composites Materials Design for Multifunctionality
02 Apr 2024 | Online Presentations | Contributor(s): Johnathan Goodsell
There are ample of evidence of materials hybridization at scale, even in nature, yields optimal respond to specific functions. In structural materials, hierarchical materials hybridization accounting for defects or porosity would offer optimal performance at reduced materials mass. Similar...
-
Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Zoom on the Flow Front
06 Apr 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Capillarity plays a major role in many natural and engineered systems, from nutrient delivery in plants, management of humidity in soils, to heat pipes and porous systems for spill recovery. In composite manufacturing, particularly in Liquid Composite Molding processes, capillary effects take...
-
CATIA Composites Braiding
09 Mar 2015 | Animations
A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.
-
Classical Laminate Plate Theory
13 May 2013 | Tools
Prediction of stresses and strains in a laminated plate of infinite in-plane dimensions. Allows for application of thermal and edge loads.
-
Composite Materials and Structures 1972-2012: Grand Challenges
23 Jul 2014 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
Composite Materials and Structures 1972-2012: Grand Challenges
28 May 2014 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.