-
Gillespie CCM
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Greg Schoeppner CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Halpin-Tsai Micromechanics Model
22 May 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Hubert McGill
20 Aug 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
28 May 2014 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer Pro Software from Collier Research
22 May 2013 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
HyperSizer Pro Software from Collier Research
28 May 2014 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Interlaminar Stresses in Symmetric Angle-Ply Laminates Subjected to Anticlastic Bending Deformation
22 May 2013 | Tool Information
The aim of the present work is to develop a solution for the interlaminar stress field in a symmetric and balanced, angle-ply laminate subjected to anticlastic bending deformation. Further, this class of problems is considered in order to elucidate the behavior of angle-ply laminates...
-
Jack Gillespie CDM Hub
20 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Jacob Fish Columbia CDM Hub
20 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
Jerry Young Boeing CDM Hub
20 Aug 2024 | Online Presentations | Contributor(s): SME Project
-
MSC.Patran/Nastran-SwiftComp GUI
01 Apr 2019 | Downloads
A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...
-
Nanohub and the HUBzero Platform
16 Aug 2014 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Ove Schuett Dassault Systemes Americas CDM Hub
18 Jul 2019 | Online Presentations | Contributor(s): SME Project
-
Pascal Hubert CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Poursartip UBC
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Puck Failure Criteria
31 Jul 2017 | Downloads
Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...
-
Schoeppner AFRL
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Schuett Dassault
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop