-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series | Contributor(s): SME Project
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 Composites Simulation Workshop Agenda
05 Jan 2016 | Teaching Materials
2015 Composites Simulation Workshop Agenda
-
2016 cdmHUB ASC Workshop
01 Sep 2016 | Series
Join us at the American Society for Composites 31st Technical Conference (http://mech.utah.edu/ASC2016/) for a hands-on workshop, on September 18, from 7:00–9:00pm, on how to use cdmHUB.org for composites learning, teaching, and research in the cloud. With the mission to convene the...
-
A Semi-Discrete Model for Progressive Damage and Failure of Fiber Reinforced Laminates
15 Nov 2021 | Online Presentations | Contributor(s): Johnathan Goodsell
High-strength and high-stiffness carbon fiber-reinforced polymer composite laminates (CFRP) are being increasingly used for primary load bearing structures in many industries. The most common material system used is based on thermoset resins (matrix material), which come in the form of convenient...
-
A Unified Theory for Constitutive Modeling of Composites
18 Apr 2016 | Publications
A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...
-
Abaqus plugins for Nonlinear Acoustics
06 Jul 2017 | Downloads
This paper introduces generalized tools in the form of plugins for a commonly used commercial finite element package Abaqus/Standard to model the nonlinear acoustic methods for detection of delamination damage in composite laminates. The nonlinear acoustic methods typically involve exciting a...
-
Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites
14 Nov 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...
-
Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites
14 Nov 2022 | Online Presentations
Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...
-
Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop
27 Jun 2014 | Teaching Materials
Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...
-
Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop
27 Jun 2014 | Teaching Materials
Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...
-
Anousch Poursartip UBC CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Automating the Lay-up of Geometrically Complex Composite Structures Made from Preimpregnated Reinforcements: a Route to a Roadmap
04 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell
A significant amount of research and industrial effort has been expended on the development of equipment such as automated fibre placement machines to lay-up prepregged reinforcements into structures of relatively simple geometry such as wing skins and spars, and fuselage structures. These...
-
Bottom-up Composites Materials Design for Multifunctionality
02 Apr 2024 | Online Presentations | Contributor(s): Johnathan Goodsell
There are ample of evidence of materials hybridization at scale, even in nature, yields optimal respond to specific functions. In structural materials, hierarchical materials hybridization accounting for defects or porosity would offer optimal performance at reduced materials mass. Similar...
-
Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Zoom on the Flow Front
06 Apr 2022 | Online Presentations | Contributor(s): Johnathan Goodsell
Capillarity plays a major role in many natural and engineered systems, from nutrient delivery in plants, management of humidity in soils, to heat pipes and porous systems for spill recovery. In composite manufacturing, particularly in Liquid Composite Molding processes, capillary effects take...
-
CATIA Composites Braiding
09 Mar 2015 | Animations
A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.
-
CDM HUB Breakout Sessions
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Breakout sessions from the May 2013 Composites Design and Manufacturing HUB workshop
-
CDM Hub Breakout Sessions 1 and 2 B-Roll
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
CDM Hub Breakout Sessions Introduction
15 Feb 2019 | Online Presentations | Contributor(s): SME Project