-
HyperSizer for Composites: Insanely Fast Laminate Optimization
31 Mar 2015
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer Pro Software from Collier Research
20 Aug 2014 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Jack Gillespie CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Jacob Fish Columbia CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Jerry Young Boeing CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Nanohub and the HUBzero Platform
16 Aug 2014 | Online Presentations | Contributor(s): SME Project
Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Ove Schuett Dassault Systemes Americas CDM Hub
18 Jul 2019 | Online Presentations | Contributor(s): SME Project
-
Pascal Hubert CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Poursartip UBC
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Puck Failure Criteria
31 Jul 2017 | Downloads
Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...
-
Schoeppner AFRL
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.
-
Schuett Dassault
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Skill of Using Surface Element in ANSYS
26 Mar 2015 | Downloads
Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...
-
Structure Genome: Fill the Gap between Materials Genome and Structural Analysis
29 Nov 2014 | Publications
A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...
-
TexGen4SC
14 Feb 2014 | Tools
Modeling of woven fabric composites generated by TexGen using SwiftComp
-
TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts
14 Feb 2014 | Downloads
This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...
-
The Challenge and Vision for cdmHUB
15 Sep 2024 | Online Presentations | Contributor(s): SME Project
Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop
-
The Challenge and Vision for cdmHUB
15 Sep 2024 | Online Presentations | Contributor(s): SME Project
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
15 Sep 2024 | Teaching Materials | Contributor(s): SME Project
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
28 May 2014 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.