-
Halpin-Tsai Micromechanics Model
13 May 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
13 May 2013 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
Mechanics of Structure Genome:Fill the Gap between Materials Genome and Structural Analysis
28 May 2014 | Downloads
This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation.
-
Mechanics of Structure Genome: Reproduce 3D FEA Using Simple Structural Models for Aero Structures
28 May 2014 | Online Presentations
This presentation is an extended lecture delivered to the Boeing FEA Community of Excellence on Sept 10th.The Mechanics of Structure Genome (MSG) has been recently developed at Purdue with the promise to revolutionize the analysis of composite structures. MSG can reproduce 3D FEA using simple...
-
MSC.Patran/Nastran-SwiftComp GUI
01 Apr 2019 | Downloads
A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...
-
Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome
23 Jan 2019 | Publications
The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...
-
Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome
23 Jan 2019 | Publications
The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...
-
Structure Genome: Fill the Gap between Materials Genome and Structural Analysis
06 Jan 2015 | Online Presentations
This presentation is given at 2015 AIAA SciTech conference. A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs...
-
Structure Genome: Fill the Gap between Materials Genome and Structural Analysis
29 Nov 2014 | Publications
A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...
-
SwiftComp: Right Results Right Away
13 May 2015 | Online Presentations
This presentation gives a brief review of SwiftComp which is a general-purpose multiscale constitutive modeling code. It can bridge microstructure with the final macroscopic structural model. It takes a FE mesh of Structure Genome, which is defined as the smallest mathematical building block of...
-
TexGen4SC
13 May 2013 | Tools
Modeling of woven fabric composites generated by TexGen using SwiftComp
-
The Mission, Vision and Programs of the Composites Design and Manufacturing HUB
13 May 2013 | Teaching Materials
The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.
-
Viscoelastic Shear Lag
13 May 2013 | Tools
Simulate the creep and stress relaxation of a uni-directional short-fiber composite.
-
Woven fabrics UMAT- a coupled material model
19 Oct 2024 | Downloads | Contributor(s): Ali Roumani
One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...