-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series | Contributor(s): SME Project
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop
27 Jun 2014 | Teaching Materials
Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...
-
Anousch Poursartip UBC CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
CDM HUB Breakout Sessions
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
Breakout sessions from the May 2013 Composites Design and Manufacturing HUB workshop
-
CDM Hub Breakout Sessions 1 and 2 B-Roll
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
CDM Hub Breakout Sessions Introduction
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
CDM Hub Introduction
17 Mar 2015 | Online Presentations | Contributor(s): SME Project
-
Chuck Tucker UIUC CDM Hub
15 Feb 2019 | Online Presentations | Contributor(s): SME Project
-
Classical Laminate Plate Theory
22 May 2013 | Tools
Prediction of stresses and strains in a laminated plate of infinite in-plane dimensions. Allows for application of thermal and edge loads.
-
Composite Materials and Structures 1972-2012: Grand Challenges
22 May 2013 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
Effective Lamina and Laminate Properties
22 May 2013 | Tools
Calculate effective lamina and laminate properties from phase properties and layup.
-
Free Edge Elasticity Solution
22 May 2013 | Tools
Simulate stress, strain and displacements in an composite angle-ply laminate subjected to uniform axial extension, anticlastic curvature and thermoelastic deformation.
-
Free-Edge Elasticity Solution: Tool Taxonomy and Evaluation
22 May 2013 | White Papers/Research Documents
A review of the free-edge elasticity solution tool, including tool taxonomy and evaluation. An overview of the solution development is provided, followed by numerous examples of tool use and evaluation. The document concludes with an evaluation of the tool maturity level. The...
-
Gillespie CCM
01 Sep 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
Greg Schoeppner CDM Hub
01 Sep 2024 | Online Presentations | Contributor(s): SME Project
-
Halpin-Tsai Micromechanics Model
22 May 2013 | Tools
Calculate homogenized lamina properties from fiber and matrix properties
-
Hubert McGill
01 Sep 2024 | Online Presentations | Contributor(s): SME Project
Presentation at the May 2013 Composites Design and Manufacturing HUB workshop
-
HyperSizer Pro Software from Collier Research
22 May 2013 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Interlaminar Stresses in Symmetric Angle-Ply Laminates Subjected to Anticlastic Bending Deformation
22 May 2013 | Tool Information
The aim of the present work is to develop a solution for the interlaminar stress field in a symmetric and balanced, angle-ply laminate subjected to anticlastic bending deformation. Further, this class of problems is considered in order to elucidate the behavior of angle-ply laminates...