-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series | Contributor(s): Ali Roumani
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
A Unified Theory for Constitutive Modeling of Composites
18 Apr 2016 | Publications
A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...
-
Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites
14 Nov 2022 | Online Presentations
Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...
-
Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes
18 Apr 2016 | Publications
This is the Master thesis from Xin Liu in Prof Yu’s research group. In this thesis, the Mechanics of Structure Genome (MSG) has be used to provide an alternative way to model composite beam-like structures. Basic concept of MSG is introduced as well as the idea of how to carry out...
-
CATIA Composites Braiding
09 Mar 2015 | Animations | Contributor(s): Ali Roumani
A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.
-
Composite Materials and Structures 1972-2012: Grand Challenges
19 Sep 2014 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
Composite Materials and Structures 1972-2012: Grand Challenges
19 Sep 2014 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
Demystifying Composites Simulation for Performance
28 Jul 2016 | Downloads | Contributor(s): Ali Roumani
The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation.
-
DiBenedetto Equation: Tg and DOC
23 Jul 2014 | Tools
DiBenedetto Equation: Glass Transition Temperature Dependence on Degree of Cure
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
28 May 2014 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer Pro Software from Collier Research
28 May 2014 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
Injection Overmolding Manufacturing Process Simulation
23 Jul 2014 | Online Presentations
Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries. The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...
-
MSC.Patran/Nastran-SwiftComp GUI
01 Apr 2019 | Downloads
A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...
-
New Developments in Platelet Composite Performance
15 Feb 2023 | Online Presentations | Contributor(s): Xuan Wang
-
New Developments in Platelet Composite Rheology
15 Feb 2023 | Online Presentations | Contributor(s): Xuan Wang
-
New Developments in Platelet Meso-scale Measurements
15 Feb 2023 | Online Presentations | Contributor(s): Xuan Wang
-
Practical Developments in Multiscale Modeling of Composites
07 Apr 2021 | Online Presentations
Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...