Generalized Free-Edge Stress Analysis Using Mechanics of Structure Genome

22 Aug 2016 | Publications

This work reveals the potential of mechanics of structure genome (MSG) for the free-edge stress analysis of composite laminates. First, the cross-sectional analysis specialized from MSG is formulated for solving a generalized free-edge problem of composite laminates. Then, MSG and the companion...

Global Composites Experts Webinar Series

12 Aug 2020 | Series | Contributor(s): Johnathan Goodsell

The webinars examine the history, present capabilities, and future of composites science and technology. The goal of the series is to accumulate the vast knowledge of composites that has been developed over the past 50 years and to make it available to the global composites community. Each...

Imparting Robustness to Out-of-Autoclave Prepregs

09 Mar 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

Autoclaves have long been used to ensure robustness in the production of composite parts. However, they present a production bottleneck, as well as high capital and recurring costs. Out-of-autoclave prepregs were introduced to allow oven curing and thereby address some of these issues. These OoA...

M3 – A Sustainable Approach to Vehicle Light-weighting with Composites: Methods – Materials – Manufacturing

07 Apr 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

The presentation will introduce our house of competence, KIT and Fraunhofer ICT and introduce our MMM approach to engineered lightweight solutions for specific industries. This comprises of the development of virtual process chains, material and manufacturing solutions for relevant technologies...

Master Laminates to Simplify Design, Manufacturing, and Testing of Composites

12 Dec 2022 | Online Presentations | Contributor(s): Johnathan Goodsell

Composite materials and structures have traditionally been viewed as more complicated than metals. With master stiffness and failure envelopes composites are as simple as metals. Stiffness of laminates can be split into two part: one for trace that represents the total stiffness capacity; one for...

Mechanics of Structure Genome:Fill the Gap between Materials Genome and Structural Analysis

18 May 2016 | Downloads

This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation. 

Mechanics of Structure Genome: Reproduce 3D FEA Using Simple Structural Models for Aero Structures

10 Sep 2015 | Online Presentations

This presentation is an extended lecture delivered to the Boeing FEA Community of Excellence on Sept 10th.The Mechanics of Structure Genome (MSG) has been recently developed at Purdue with the promise to revolutionize the analysis of composite structures. MSG can reproduce 3D FEA using simple...

Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome

23 Jan 2019 | Publications

The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...

Multiscale Modeling of Damage Mechanics of Fiber Reinforced Polymer Composites From Micro- to Macroscale: The (Virtual) Reality and Challenges Ahead

13 May 2022 | Online Presentations | Contributor(s): Johnathan Goodsell

Multi-scale modelling of composites is a very active topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large...

Novel Powder Epoxy Composites for Thick-Section Structures

25 Jan 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

This seminar discusses the ongoing work at The University of Edinburgh on the processing, design and testing of thicksection composites for industrial structures such as large wind and tidal turbine blades, via powder epoxy resin systems. Thick-section composite parts are difficult to manufacture...

Practical Developments in Multiscale Modeling of Composites

07 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

Recent Developments in Computational Approaches to Model Laminated Composite Shells and Damage and Fracture in Solids

16 Feb 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

In this lecture, two different topics of considerable interest to composite materials and structural mechanics communities are discussed. The first topic deals with the development of locking-free shell finite elements with thickness stretch for the nonlinear analysis of isotropic and laminated...

Rheology of Carbon Fiber Thermoplastic Polymer Composites

26 Apr 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

The rheology of fiber–reinforced thermoplastic composites will be presented with specific focus on several topics studied over the past three decades. Interest in the elongational viscosity of collimated, discontinuous fiber systems was initiated by the introduction of impregnated,...

Structural Self-sensing Based on Measuring the Resistance, Capacitance or Inductance of the Structural <aterial, Without Sensor Incorporation

06 Nov 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

Structural self-sensing refers to a structural material sensing itself without sensor incorporation. Compared to sensor incorporation, advantages include low cost, high durability, large sensing volume and the mechanical properties being not degraded. The self-sensing ability makes the structural...

Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

06 Jan 2015 | Online Presentations

This presentation is given at 2015 AIAA SciTech conference. A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs...

Sustainable Manufacturing of Composite Materials

21 May 2021 | Online Presentations | Contributor(s): Johnathan Goodsell

The growing use of composite materials in aerospace, transportation, recreational products and renewable energy production manufacturing has created a critical need for low-cost sustainable manufacturing methods. The current methods of consolidation and cure are not compatible with the projected...

SwiftComp: Right Results Right Away

13 May 2015 | Online Presentations

This presentation gives a brief review of SwiftComp which is a general-purpose multiscale constitutive modeling code. It can bridge microstructure with the final macroscopic structural model. It takes a FE mesh of Structure Genome, which is defined as the smallest mathematical building block of...

The Challenges of Determining the Strength of Composites

24 Nov 2020 | Online Presentations | Contributor(s): Johnathan Goodsell

Why are there such large differences in reported strengths of composites? Some of the reasons are the definition of strength, material variability, poor test methods, and subtle variations in carrying out the tests. But there are other important factors that affect strength that are not...

The Story of Permeability in Liquid Composite Molding (LCM): How to Devise and Validate Process Simulation Software?

13 Apr 2022 | Online Presentations | Contributor(s): Johnathan Goodsell

Permeability characterizes the capability of establishing a fluid flow through a porous medium. This lecture aims to present a summary on the state-of-the-art knowledge on permeability in LCM together with a discussion on open questions. The Story of Permeability in Liquid Composite Molding (LCM)...

US-COMP: Next Generation of Composites Materials for Crewed Deep Space Missions

15 Dec 2023 | Online Presentations | Contributor(s): Johnathan Goodsell

Current state-of-the-art composite materials are not light/strong enough for crewed missions to Mars and beyond. Structural components of deep space vehicles require lighter/stronger materials for fuel efficiency. The NASA Space Technologies Research Institute (STRI) for Ultra-Strong Composites...