VUMAT of a Generalized Standard Continuum Damage Model

13 Apr 2018 | Downloads

Based on a recently developed generalized standard continuum damage model (CDM), this VUMAT user subroutine provides a rigorous and robust framework for implementing various damage behavior into 2D or 3D solid elements in a finite element analysis (FEA). It is designed to be used with...

Composite Stiffness Property Prediction

07 Aug 2017 | Downloads

Micromechanical models for the composite axial tensile, transverse tensile, and axial shear are combined into one tool with the objective of comparing their effectiveness as property prediction methods.  Rule of mixtures models (ROM) and the composite cylinder model (CCM) results for...

Woven fabrics UMAT- a coupled material model

02 Aug 2017 | Downloads

One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

Puck Failure Criteria

31 Jul 2017 | Downloads

Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

Puck Failure Criteria

31 Jul 2017 | Downloads

Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

Finite element unit cell model based on ABAQUS for fiber reinforced composites

26 Jul 2017 | Downloads

Micromechanical investigations of polymer matrix composites with shape memory alloy reinforcement

18 Jul 2017 | Publications

Numerical characterization of effective fully coupled thermo-electro-magneto-viscoelastic-plastic response of smart composites

18 Jul 2017 | Publications

Forming simulation using PAM-FORM, AniForm, LS-DYNA, and ABAQUS

18 Jul 2017 | Animations

Computational evaluation of effective stress relaxation behavior of polymer composites

11 Jul 2017 | Publications

This paper presents a micromechanics model to characterize the effective stress relaxationstiffness of polymer composites. The linear viscoelastic behavior of polymer material wasmodeled by hereditary integral. The proposed model was established based on thevariational asymptotic method for unit...

MUL2-UC Beam modeling of periodically heterogeneous composites

13 Jun 2017 | Downloads

The micromechanics code MUL2-UC is developed to work as an efficient and high-fidelity tool for the computation of the effective stiffness matrix and the recovering of the local fields of periodically heterogeneous composite structures. The main novelty is that higher-order beam theories are...

ABAQUS-SwiftComp GUI

19 May 2016 | Downloads

This resource contains the download of the release package of ABAQUS-SwiftComp GUI.  Please be advised that what you download is the GUI only, you have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

Mechanics of Structure Genome:Fill the Gap between Materials Genome and Structural Analysis

18 May 2016 | Downloads

This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation. 

Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes

18 Apr 2016 | Publications

This is the Master thesis from Xin Liu in Prof Yu’s research group. In this thesis, the Mechanics of Structure Genome (MSG) has be used to provide an alternative way to model composite beam-like structures. Basic concept of MSG is introduced as well as the idea of how to carry out...

2015 cdmHUB Workshop

05 Jan 2016 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

2015 cdmHUB Workshop

05 Jan 2016 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

Presentation of Micromechanics Simulation Challenge Level I Initial Results

04 Aug 2015 | Downloads

The attached slides summarize the Micromechanics Simulation Challenge Level I Initial Results in a presentation format. The complete report can be found at https://cdmhub.org/resources/948, and all the files supporting the results can be found...

ABAQUS-VABS GUI

29 Jun 2015 | Downloads

A Python script used to convert the input file generated by ABAQUS for VABS, a detailed step-by-step instruction using ABAQUS CAE to generate a simple beam section (composite anisotropic pipe)  is also given. Python scripts for generating more complex sections such as real...

HyperSizer for Composites: Insanely Fast Laminate Optimization

31 Mar 2015 | Tool Information

95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

Skill of Using Surface Element in ANSYS

26 Mar 2015 | Downloads

Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...