Resources: All

Find a resource
  1. abaqus x
  2. mechanicsofstructuregenome x
  3. compositesanalysis x
  4. compositesdesign x
  5. simulation x
  1. Constitutive modeling for time- and temperature-dependent behavior of composites

    08 Jan 2020

    Structural integrity, durability, and thermal stability represent critical areas for adequately modeling the behavior of composite materials. Polymeric matrices are prone to have time-dependent behavior very sensitive to changes in temperature that influence the effective properties of the...

  2. MSC.Patran/Nastran-SwiftComp GUI

    01 Apr 2019

    A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

  3. VUMAT of a Generalized Standard Continuum Damage Model

    13 Apr 2018 | Downloads

    Based on a recently developed generalized standard continuum damage model (CDM), this VUMAT user subroutine provides a rigorous and robust framework for implementing various damage behavior into 2D or 3D solid elements in a finite element analysis (FEA). It is designed to be used with...

  4. Woven fabrics UMAT- a coupled material model

    02 Aug 2017 | Downloads

    One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

  5. Woven fabrics UMAT- a coupled material model

    02 Aug 2017 | Downloads | Contributor(s): Ali Roumani

    One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

  6. Puck Failure Criteria

    31 Jul 2017 | Downloads

    Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

  7. Forming simulation using PAM-FORM, AniForm, LS-DYNA, and ABAQUS

    18 Jul 2017 | Animations

  8. Demystifying Composites Simulation for Performance

    28 Jul 2016 | Downloads | Contributor(s): Ali Roumani

    The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation. 

  9. ABAQUS-SwiftComp GUI

    19 May 2016 | Downloads

    This resource contains the download of the release package of ABAQUS-SwiftComp GUI.  Please be advised that what you download is the GUI only, you have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

  10. 2015 cdmHUB Workshop

    05 Jan 2016 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  11. 2015 cdmHUB Workshop

    05 Jan 2016 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  12. 2015 cdmHUB Workshop

    05 Jan 2016 | Series | Contributor(s): Ali Roumani

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  13. ABAQUS-VABS GUI

    29 Jun 2015 | Downloads

    A Python script used to convert the input file generated by ABAQUS for VABS, a detailed step-by-step instruction using ABAQUS CAE to generate a simple beam section (composite anisotropic pipe)  is also given. Python scripts for generating more complex sections such as real...

  14. CATIA Composites Braiding

    09 Mar 2015 | Animations | Contributor(s): Ali Roumani

    A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.

  15. NAFEMS Invitation to Tender: How to Obtain Material Properties for Structural Analysis of Composites

    13 Feb 2015 | White Papers/Research Documents

    The NAFEMS Composites Working Group wishes to commission a new document with the suggested title "How to Obtain Material Properties for Structural Analysis of Composites". The book will be a companion volume to the existing NAFEMS publications "An introduction to the use of material models in...

  16. Keith Kedward and Composites Design (Slides)

    22 Sep 2014 | Teaching Materials

    Professor Byron Pipes' slides from the 2014 ASC meeting at UCSD discussing Keith Kedward and Composites Design

  17. Keith Kedward and Composites Design (Recorded Talk)

    22 Sep 2014 | Teaching Materials

    Professor Byron Pipes speaks at the 2014 ASC Conference at UCSD in tribute to Keith Kedward on the subject of Composites Design.

  18. Composite Materials and Structures 1972-2012: Grand Challenges

    19 Sep 2014 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

  19. 2013 Composites Design and Manufacturing HUB Kickoff Workshop

    04 Sep 2014 | Series

    The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

  20. 2013 Composites Design and Manufacturing HUB Kickoff Workshop

    04 Sep 2014 | Series

    The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.