Resources: All

Find a resource
  1. beamtheory x
  2. homogenization x
  3. compositeanalysis x
  4. micromechanics x
  1. Composite Stiffness Property Prediction

    07 Aug 2017

    Micromechanical models for the composite axial tensile, transverse tensile, and axial shear are combined into one tool with the objective of comparing their effectiveness as property prediction methods.  Rule of mixtures models (ROM) and the composite cylinder model (CCM) results for...

  2. Puck Failure Criteria

    31 Jul 2017

    Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

  3. Finite element unit cell model based on ABAQUS for fiber reinforced composites

    26 Jul 2017

  4. Micromechanical investigations of polymer matrix composites with shape memory alloy reinforcement

    18 Jul 2017

  5. Numerical characterization of effective fully coupled thermo-electro-magneto-viscoelastic-plastic response of smart composites

    18 Jul 2017

  6. Computational evaluation of effective stress relaxation behavior of polymer composites

    11 Jul 2017

    This paper presents a micromechanics model to characterize the effective stress relaxationstiffness of polymer composites. The linear viscoelastic behavior of polymer material wasmodeled by hereditary integral. The proposed model was established based on thevariational asymptotic method for unit...

  7. MUL2-UC Beam modeling of periodically heterogeneous composites

    13 Jun 2017

    The micromechanics code MUL2-UC is developed to work as an efficient and high-fidelity tool for the computation of the effective stiffness matrix and the recovering of the local fields of periodically heterogeneous composite structures. The main novelty is that higher-order beam theories are...

  8. VABS: Powering Simple Beam Elements with Detailed 3D FEA Fidelity

    06 Jan 2017

    This presentation gives a brief introduction to VABS, a general-purpose cross-sectional analysis, which can power conventional, simple beam elements with detailed 3D FEA fidelity. 

  9. TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts

    03 Jan 2017

    This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...

  10. TexGen4SC

    14 Feb 2014 | Tools

    Modeling of woven fabric composites generated by TexGen using SwiftComp

  11. Mechanics of Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

    10 Oct 2013 | Downloads

    This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation. 

  12. 2015 cdmHUB Workshop

    14 Feb 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  13. 2015 cdmHUB Workshop

    10 Oct 2013 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  14. Presentation of Micromechanics Simulation Challenge Level I Initial Results

    10 Oct 2013 | Downloads

    The attached slides summarize the Micromechanics Simulation Challenge Level I Initial Results in a presentation format. The complete report can be found at https://cdmhub.org/resources/948, and all the files supporting the results can be found...

  15. Skill of Using Surface Element in ANSYS

    14 Feb 2014 | Downloads

    Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

  16. Skill of Using Surface Element in ANSYS

    10 Oct 2013 | Downloads

    Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

  17. Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

    10 Oct 2013 | Publications

    A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

  18. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    22 May 2013 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  19. Composite Materials and Structures 1972-2012: Grand Challenges

    22 May 2013 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

  20. 2013 Composites Design and Manufacturing HUB Kickoff Workshop

    22 May 2013 | Series

    The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.