Resources: All

Find a resource
  1. compositeanalysis x
  2. abaqus x
  3. multiscalemodeling x
  4. compositesmanufacturing x
  5. micromechanics x
  1. Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites

    14 Nov 2022

    Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...

  2. Practical Developments in Multiscale Modeling of Composites

    07 Apr 2021

    Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

  3. MSC.Patran/Nastran-SwiftComp GUI

    01 Apr 2019

    A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

  4. VUMAT of a Generalized Standard Continuum Damage Model

    13 Apr 2018 | Downloads

    Based on a recently developed generalized standard continuum damage model (CDM), this VUMAT user subroutine provides a rigorous and robust framework for implementing various damage behavior into 2D or 3D solid elements in a finite element analysis (FEA). It is designed to be used with...

  5. Composite Stiffness Property Prediction

    07 Aug 2017 | Downloads

    Micromechanical models for the composite axial tensile, transverse tensile, and axial shear are combined into one tool with the objective of comparing their effectiveness as property prediction methods.  Rule of mixtures models (ROM) and the composite cylinder model (CCM) results for...

  6. Woven fabrics UMAT- a coupled material model

    02 Aug 2017 | Downloads

    One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

  7. Puck Failure Criteria

    31 Jul 2017 | Downloads

    Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

  8. Puck Failure Criteria

    31 Jul 2017 | Downloads

    Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

  9. Finite element unit cell model based on ABAQUS for fiber reinforced composites

    26 Jul 2017 | Downloads

  10. Micromechanical investigations of polymer matrix composites with shape memory alloy reinforcement

    18 Jul 2017 | Publications

  11. Numerical characterization of effective fully coupled thermo-electro-magneto-viscoelastic-plastic response of smart composites

    18 Jul 2017 | Publications

  12. Forming simulation using PAM-FORM, AniForm, LS-DYNA, and ABAQUS

    18 Jul 2017 | Animations

  13. Computational evaluation of effective stress relaxation behavior of polymer composites

    11 Jul 2017 | Publications

    This paper presents a micromechanics model to characterize the effective stress relaxationstiffness of polymer composites. The linear viscoelastic behavior of polymer material wasmodeled by hereditary integral. The proposed model was established based on thevariational asymptotic method for unit...

  14. Injection Overmolding Manufacturing Process Simulation

    29 Jun 2017 | Online Presentations

    Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries.  The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...

  15. MUL2-UC Beam modeling of periodically heterogeneous composites

    13 Jun 2017 | Downloads

    The micromechanics code MUL2-UC is developed to work as an efficient and high-fidelity tool for the computation of the effective stiffness matrix and the recovering of the local fields of periodically heterogeneous composite structures. The main novelty is that higher-order beam theories are...

  16. ABAQUS-SwiftComp GUI

    19 May 2016 | Downloads

    This resource contains the download of the release package of ABAQUS-SwiftComp GUI.  Please be advised that what you download is the GUI only, you have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

  17. Mechanics of Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

    18 May 2016 | Downloads

    This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation. 

  18. A Unified Theory for Constitutive Modeling of Composites

    18 Apr 2016 | Publications

    A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...

  19. 2015 cdmHUB Workshop

    05 Jan 2016 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  20. 2015 cdmHUB Workshop

    05 Jan 2016 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.