Resources: All

Find a resource
  1. compositemechanics x
  2. compositesdesign x
  3. beamtheory x
  4. compositesmanufacturing x
  5. simulation x
  1. Woven fabrics UMAT- a coupled material model

    02 Aug 2017 | Contributor(s): Ali Roumani

    One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

  2. Injection Overmolding Manufacturing Process Simulation

    29 Jun 2017 | Online Presentations

    Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries.  The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...

  3. VABS: Powering Simple Beam Elements with Detailed 3D FEA Fidelity

    06 Jan 2017 | Downloads

    This presentation gives a brief introduction to VABS, a general-purpose cross-sectional analysis, which can power conventional, simple beam elements with detailed 3D FEA fidelity. 

  4. Orthotropic Stress Concentration Factor

    25 Sep 2014 | Tools

    Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate

  5. Demystifying Composites Simulation for Performance

    02 Dec 2024 | Downloads | Contributor(s): Ali Roumani

    The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation. 

  6. 2015 cdmHUB Workshop

    23 Jul 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  7. 2015 cdmHUB Workshop

    23 Jul 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  8. 2015 cdmHUB Workshop

    02 Dec 2024 | Series | Contributor(s): Ali Roumani

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  9. CATIA Composites Braiding

    02 Dec 2024 | Animations | Contributor(s): Ali Roumani

    A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.

  10. DiBenedetto Equation: Tg and DOC

    23 Jul 2014 | Tools

    DiBenedetto Equation: Glass Transition Temperature Dependence on Degree of Cure

  11. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    25 Sep 2014 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  12. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    23 Jul 2014 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  13. Plane-Stress Compliance Transform

    25 Sep 2014 | Tools

    Transforms 2D compliance terms by rotation about the 3-axis

  14. Keith Kedward and Composites Design (Slides)

    23 Jul 2014 | Teaching Materials

    Professor Byron Pipes' slides from the 2014 ASC meeting at UCSD discussing Keith Kedward and Composites Design

  15. Keith Kedward and Composites Design (Recorded Talk)

    23 Jul 2014 | Teaching Materials

    Professor Byron Pipes speaks at the 2014 ASC Conference at UCSD in tribute to Keith Kedward on the subject of Composites Design.

  16. Composite Materials and Structures 1972-2012: Grand Challenges

    23 Jul 2014 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

  17. Composite Materials and Structures 1972-2012: Grand Challenges

    23 Jul 2014 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

  18. 2013 Composites Design and Manufacturing HUB Kickoff Workshop

    23 Jul 2014 | Series

    The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

  19. HyperSizer Pro Software from Collier Research

    23 Jul 2014 | Tool Information

    HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...