Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites

14 Nov 2022

Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...

Practical Developments in Multiscale Modeling of Composites

07 Apr 2021

Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

Constitutive modeling for time- and temperature-dependent behavior of composites

08 Jan 2020

Structural integrity, durability, and thermal stability represent critical areas for adequately modeling the behavior of composite materials. Polymeric matrices are prone to have time-dependent behavior very sensitive to changes in temperature that influence the effective properties of the...

MSC.Patran/Nastran-SwiftComp GUI

01 Apr 2019

A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

MSC.Patran/Nastran-SwiftComp GUI

01 Apr 2019

A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome

23 Jan 2019

The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...

ANSYS Workbench SwiftComp GUI

03 Jan 2019

This resource contains the download of the release package of ANSYS Workbench SwiftComp GUI. Please be advised that what you download is the GUI only. You have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC...

Free Edge Stress Analysis of Laminated Structures with Arbitrary Cross Sections Using Mechanics of Structure Genome

12 Dec 2016 | Publications

This is the master thesis from Lingxuan Zhou advised by Prof. Yu. In this thesis, free-edge stress analysis of composite laminated structures with arbitrary cross sections is dealt with using mechanics of structure genome (MSG). A cross-sectional analysis specialized from MSG is...

Generalized Free-Edge Stress Analysis Using Mechanics of Structure Genome

22 Aug 2016 | Publications

This work reveals the potential of mechanics of structure genome (MSG) for the free-edge stress analysis of composite laminates. First, the cross-sectional analysis specialized from MSG is formulated for solving a generalized free-edge problem of composite laminates. Then, MSG and the companion...

ANSYS-SwiftComp GUI

19 May 2016 | Downloads

This resource contains the download of the release package of ANSYS-SwiftComp GUI. Please be advised that what you download is the GUI only. You have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

ABAQUS-SwiftComp GUI

19 May 2016 | Downloads

This resource contains the download of the release package of ABAQUS-SwiftComp GUI.  Please be advised that what you download is the GUI only, you have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

Mechanics of Structure Genome:Fill the Gap between Materials Genome and Structural Analysis

18 May 2016 | Downloads

This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation. 

A Unified Theory for Constitutive Modeling of Composites

18 Apr 2016 | Publications

A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...

A Unified Theory for Constitutive Modeling of Composites

18 Apr 2016 | Publications

A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...

2015 cdmHUB Workshop

05 Jan 2016 | Series | Contributor(s): Nikki Huang

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

Mechanics of Structure Genome: Reproduce 3D FEA Using Simple Structural Models for Aero Structures

10 Sep 2015 | Online Presentations

This presentation is an extended lecture delivered to the Boeing FEA Community of Excellence on Sept 10th.The Mechanics of Structure Genome (MSG) has been recently developed at Purdue with the promise to revolutionize the analysis of composite structures. MSG can reproduce 3D FEA using simple...

SwiftComp: Right Results Right Away

13 May 2015 | Online Presentations

This presentation gives a brief review of SwiftComp which is a general-purpose multiscale constitutive modeling code. It can bridge microstructure with the final macroscopic structural model. It takes a FE mesh of Structure Genome, which is defined as the smallest mathematical building block of...

HyperSizer for Composites: Insanely Fast Laminate Optimization

31 Mar 2015 | Tool Information | Contributor(s): Nikki Huang

95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

06 Jan 2015 | Online Presentations

This presentation is given at 2015 AIAA SciTech conference. A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs...

Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

29 Nov 2014 | Publications

A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...