Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites

14 Nov 2022

Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...

Practical Developments in Multiscale Modeling of Composites

07 Apr 2021

Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

MSC.Patran/Nastran-SwiftComp GUI

01 Apr 2019

A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

VUMAT of a Generalized Standard Continuum Damage Model

13 Apr 2018 | Downloads

Based on a recently developed generalized standard continuum damage model (CDM), this VUMAT user subroutine provides a rigorous and robust framework for implementing various damage behavior into 2D or 3D solid elements in a finite element analysis (FEA). It is designed to be used with...

Woven fabrics UMAT- a coupled material model

02 Aug 2017 | Downloads

One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

Woven fabrics UMAT- a coupled material model

02 Aug 2017 | Downloads | Contributor(s): Ali Roumani

One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

Puck Failure Criteria

31 Jul 2017 | Downloads

Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

Forming simulation using PAM-FORM, AniForm, LS-DYNA, and ABAQUS

18 Jul 2017 | Animations

Orthotropic Stress Concentration Factor

25 Sep 2014 | Tools

Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate

Demystifying Composites Simulation for Performance

18 Nov 2024 | Downloads | Contributor(s): Ali Roumani

The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation. 

ABAQUS-SwiftComp GUI

19 May 2016 | Downloads

This resource contains the download of the release package of ABAQUS-SwiftComp GUI.  Please be advised that what you download is the GUI only, you have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

A Unified Theory for Constitutive Modeling of Composites

18 Apr 2016 | Publications

A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...

2015 cdmHUB Workshop

05 Jan 2016 | Series | Contributor(s): Ali Roumani

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

ABAQUS-VABS GUI

29 Jun 2015 | Downloads

A Python script used to convert the input file generated by ABAQUS for VABS, a detailed step-by-step instruction using ABAQUS CAE to generate a simple beam section (composite anisotropic pipe)  is also given. Python scripts for generating more complex sections such as real...

CATIA Composites Braiding

09 Mar 2015 | Animations | Contributor(s): Ali Roumani

A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.

Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

29 Nov 2014 | Publications

A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

08 Oct 2014 | Teaching Materials

The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

Plane-Stress Compliance Transform

25 Sep 2014 | Tools

Transforms 2D compliance terms by rotation about the 3-axis