-
New Developments in Platelet Composite Rheology
15 Feb 2023 | Contributor(s): Xuan Wang
-
New Developments in Platelet Composite Performance
15 Feb 2023 | Contributor(s): Xuan Wang
-
New Developments in Platelet Meso-scale Measurements
15 Feb 2023 | Contributor(s): Xuan Wang
-
State of the Art of Rheology of Concentrated Suspensions
14 Feb 2023 | Contributor(s): Xuan Wang
-
Constitutive modeling for time- and temperature-dependent behavior of composites
08 Jan 2020
Structural integrity, durability, and thermal stability represent critical areas for adequately modeling the behavior of composite materials. Polymeric matrices are prone to have time-dependent behavior very sensitive to changes in temperature that influence the effective properties of the...
-
MSC.Patran/Nastran-SwiftComp GUI
01 Apr 2019
A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...
-
VABS: Powering Simple Beam Elements with Detailed 3D FEA Fidelity
06 Jan 2017
This presentation gives a brief introduction to VABS, a general-purpose cross-sectional analysis, which can power conventional, simple beam elements with detailed 3D FEA fidelity.
-
2015 cdmHUB Workshop
05 Jan 2016 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
Keith Kedward and Composites Design (Slides)
22 Sep 2014 | Teaching Materials
Professor Byron Pipes' slides from the 2014 ASC meeting at UCSD discussing Keith Kedward and Composites Design
-
Keith Kedward and Composites Design (Recorded Talk)
22 Sep 2014 | Teaching Materials
Professor Byron Pipes speaks at the 2014 ASC Conference at UCSD in tribute to Keith Kedward on the subject of Composites Design.
-
Composite Materials and Structures 1972-2012: Grand Challenges
19 Sep 2014 | Teaching Materials
Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.
-
2013 Composites Design and Manufacturing HUB Kickoff Workshop
04 Sep 2014 | Series
The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government. Select presentations from the workshop are included in this series.
-
HyperSizer Pro Software from Collier Research
20 Aug 2014 | Tool Information
HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...
-
PostGEBT
15 Aug 2014 | Downloads
PostGEBT is a post-processing code which can effectively visualize mass data generated by the nonlinear beam solver GEBT. PostGEBT reads and visualizes the results produced by GEBT for static, steady-state, transient dynamic, and eigenvalue analyses. More details can be found in the PostGEBT...
-
Geometrically Exact Beam Theory
11 Jul 2014 | Downloads
Geometrically Exact Beam Theory (GEBT), is a general-purpose tool for nonlinear analysis of composite slender structures, meeting the design challenges associated with future engineering systems featuring highly-flexible slender structures made of composites. GEBT is based on the mixed...