Resources: All

Find a resource
  1. homogenization x
  2. analysis x
  3. compositesanalysis x
  4. composites x
  5. micromechanics x
  1. Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome

    23 Jan 2019

    The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...

  2. Composite Stiffness Property Prediction

    07 Aug 2017

    Micromechanical models for the composite axial tensile, transverse tensile, and axial shear are combined into one tool with the objective of comparing their effectiveness as property prediction methods.  Rule of mixtures models (ROM) and the composite cylinder model (CCM) results for...

  3. Finite element unit cell model based on ABAQUS for fiber reinforced composites

    26 Jul 2017

  4. Micromechanical investigations of polymer matrix composites with shape memory alloy reinforcement

    18 Jul 2017

  5. Numerical characterization of effective fully coupled thermo-electro-magneto-viscoelastic-plastic response of smart composites

    18 Jul 2017

  6. Computational evaluation of effective stress relaxation behavior of polymer composites

    11 Jul 2017

    This paper presents a micromechanics model to characterize the effective stress relaxationstiffness of polymer composites. The linear viscoelastic behavior of polymer material wasmodeled by hereditary integral. The proposed model was established based on thevariational asymptotic method for unit...

  7. Abaqus plugins for Nonlinear Acoustics

    06 Jul 2017

    This paper introduces generalized tools in the form of plugins for a commonly used commercial finite element package Abaqus/Standard to model the nonlinear acoustic methods for detection of delamination damage in composite laminates. The nonlinear acoustic methods typically involve exciting a...

  8. MUL2-UC Beam modeling of periodically heterogeneous composites

    13 Jun 2017

    The micromechanics code MUL2-UC is developed to work as an efficient and high-fidelity tool for the computation of the effective stiffness matrix and the recovering of the local fields of periodically heterogeneous composite structures. The main novelty is that higher-order beam theories are...

  9. TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts

    03 Jan 2017

    This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...

  10. TexGen4SC

    13 May 2013 | Tools

    Modeling of woven fabric composites generated by TexGen using SwiftComp

  11. TexGen4SC

    14 Feb 2014 | Tools

    Modeling of woven fabric composites generated by TexGen using SwiftComp

  12. Mechanics of Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

    10 Oct 2013 | Downloads

    This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation. 

  13. 2015 cdmHUB Workshop

    27 Jun 2014 | Series | Contributor(s): Nikki Huang

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  14. 2015 cdmHUB Workshop

    13 May 2013 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  15. 2015 cdmHUB Workshop

    23 Jul 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  16. 2015 cdmHUB Workshop

    14 Feb 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  17. 2015 cdmHUB Workshop

    10 Oct 2013 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  18. Presentation of Micromechanics Simulation Challenge Level I Initial Results

    10 Oct 2013 | Downloads

    The attached slides summarize the Micromechanics Simulation Challenge Level I Initial Results in a presentation format. The complete report can be found at https://cdmhub.org/resources/948, and all the files supporting the results can be found...

  19. HyperSizer for Composites: Insanely Fast Laminate Optimization

    27 Jun 2014 | Tool Information | Contributor(s): Nikki Huang

    95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

  20. HyperSizer for Composites: Insanely Fast Laminate Optimization

    13 May 2013 | Tool Information

    95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...