Resources: All

Find a resource
  1. homogenization x
  2. compositesanalysis x
  3. compositesmanufacturing x
  4. compositestructures x
  5. compositesdesign x
  1. Injection Overmolding Manufacturing Process Simulation

    29 Jun 2017 | Online Presentations

    Injection over-molding or hybrid molding is a high-rate composites manufacturing process for fabrication of structural components with complex geometries.  The structural backbone is provided by a continuous-fiber woven prepreg while the geometric complexity is realized via injection...

  2. TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts

    03 Jan 2017 | Downloads

    This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...

  3. TexGen4SC

    14 Feb 2014 | Tools

    Modeling of woven fabric composites generated by TexGen using SwiftComp

  4. Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes

    28 May 2014 | Publications

    This is the Master thesis from Xin Liu in Prof Yu’s research group. In this thesis, the Mechanics of Structure Genome (MSG) has be used to provide an alternative way to model composite beam-like structures. Basic concept of MSG is introduced as well as the idea of how to carry out...

  5. 2015 cdmHUB Workshop

    23 Jul 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  6. 2015 cdmHUB Workshop

    23 Jul 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  7. 2015 cdmHUB Workshop

    23 Jul 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  8. 2015 cdmHUB Workshop

    28 May 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  9. 2015 cdmHUB Workshop

    14 Feb 2014 | Series

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  10. HyperSizer for Composites: Insanely Fast Laminate Optimization

    28 May 2014 | Tool Information

    95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

  11. Skill of Using Surface Element in ANSYS

    14 Feb 2014 | Downloads

    Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

  12. NAFEMS Invitation to Tender: How to Obtain Material Properties for Structural Analysis of Composites

    23 Jul 2014 | White Papers/Research Documents

    The NAFEMS Composites Working Group wishes to commission a new document with the suggested title "How to Obtain Material Properties for Structural Analysis of Composites". The book will be a companion volume to the existing NAFEMS publications "An introduction to the use of material models in...

  13. Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

    28 May 2014 | Publications

    A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

  14. Variational Asymptotic Modeling of Composite Dimensionally Reducible Structures

    28 May 2014 | Publications

    This is Prof. Yu's PhD dissertation. In this disseration, the variational asymptotic method has be used to provide a systematic, holistic, and rigorous approach to construct efficient yet accurate models for composite beams, plates, and shells.  

  15. DiBenedetto Equation: Tg and DOC

    23 Jul 2014 | Tools

    DiBenedetto Equation: Glass Transition Temperature Dependence on Degree of Cure

  16. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    23 Jul 2014 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  17. The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

    28 May 2014 | Teaching Materials

    The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

  18. Keith Kedward and Composites Design (Slides)

    23 Jul 2014 | Teaching Materials

    Professor Byron Pipes' slides from the 2014 ASC meeting at UCSD discussing Keith Kedward and Composites Design

  19. Keith Kedward and Composites Design (Recorded Talk)

    23 Jul 2014 | Teaching Materials

    Professor Byron Pipes speaks at the 2014 ASC Conference at UCSD in tribute to Keith Kedward on the subject of Composites Design.

  20. Composite Materials and Structures 1972-2012: Grand Challenges

    23 Jul 2014 | Teaching Materials

    Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.