Woven fabrics UMAT- a coupled material model

02 Aug 2017 | Contributor(s): Ali Roumani

One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts

03 Jan 2017

This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...

TexGen4SC

14 Feb 2014 | Tools

Modeling of woven fabric composites generated by TexGen using SwiftComp

Demystifying Composites Simulation for Performance

21 Nov 2024 | Downloads | Contributor(s): Ali Roumani

The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation. 

2015 cdmHUB Workshop

27 Jun 2014 | Series | Contributor(s): Nikki Huang

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

2015 cdmHUB Workshop

14 Feb 2014 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

2015 cdmHUB Workshop

21 Nov 2024 | Series | Contributor(s): Ali Roumani

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

HyperSizer for Composites: Insanely Fast Laminate Optimization

27 Jun 2014 | Tool Information | Contributor(s): Nikki Huang

95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

Skill of Using Surface Element in ANSYS

14 Feb 2014 | Downloads

Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

CATIA Composites Braiding

21 Nov 2024 | Animations | Contributor(s): Ali Roumani

A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.

2013 Composites Design and Manufacturing HUB Kickoff Workshop

27 Jun 2014 | Series | Contributor(s): Nikki Huang

The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

HyperSizer Pro Software from Collier Research

27 Jun 2014 | Tool Information | Contributor(s): Nikki Huang

HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

Effective Lamina and Laminate Properties

14 Feb 2014 | Tools

Calculate effective lamina and laminate properties from phase properties and layup.

Halpin-Tsai Micromechanics Model

14 Feb 2014 | Tools

Calculate homogenized lamina properties from fiber and matrix properties