-
Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome
23 Jan 2019
The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...
-
Composite Stiffness Property Prediction
07 Aug 2017
Micromechanical models for the composite axial tensile, transverse tensile, and axial shear are combined into one tool with the objective of comparing their effectiveness as property prediction methods. Rule of mixtures models (ROM) and the composite cylinder model (CCM) results for...
-
Woven fabrics UMAT- a coupled material model
02 Aug 2017 | Contributor(s): Ali Roumani
One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...
-
Finite element unit cell model based on ABAQUS for fiber reinforced composites
26 Jul 2017
-
Micromechanical investigations of polymer matrix composites with shape memory alloy reinforcement
18 Jul 2017
-
Numerical characterization of effective fully coupled thermo-electro-magneto-viscoelastic-plastic response of smart composites
18 Jul 2017
-
Computational evaluation of effective stress relaxation behavior of polymer composites
11 Jul 2017
This paper presents a micromechanics model to characterize the effective stress relaxationstiffness of polymer composites. The linear viscoelastic behavior of polymer material wasmodeled by hereditary integral. The proposed model was established based on thevariational asymptotic method for unit...
-
Abaqus plugins for Nonlinear Acoustics
06 Jul 2017
This paper introduces generalized tools in the form of plugins for a commonly used commercial finite element package Abaqus/Standard to model the nonlinear acoustic methods for detection of delamination damage in composite laminates. The nonlinear acoustic methods typically involve exciting a...
-
MUL2-UC Beam modeling of periodically heterogeneous composites
13 Jun 2017
The micromechanics code MUL2-UC is developed to work as an efficient and high-fidelity tool for the computation of the effective stiffness matrix and the recovering of the local fields of periodically heterogeneous composite structures. The main novelty is that higher-order beam theories are...
-
TexGen4SC
13 May 2013 | Tools
Modeling of woven fabric composites generated by TexGen using SwiftComp
-
Demystifying Composites Simulation for Performance
30 Oct 2024 | Downloads | Contributor(s): Ali Roumani
The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation.
-
Mechanics of Structure Genome:Fill the Gap between Materials Genome and Structural Analysis
10 Oct 2013 | Downloads
This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation.
-
Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes
28 May 2014 | Publications
This is the Master thesis from Xin Liu in Prof Yu’s research group. In this thesis, the Mechanics of Structure Genome (MSG) has be used to provide an alternative way to model composite beam-like structures. Basic concept of MSG is introduced as well as the idea of how to carry out...
-
2015 cdmHUB Workshop
13 May 2013 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
28 May 2014 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
10 Oct 2013 | Series
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
2015 cdmHUB Workshop
30 Oct 2024 | Series | Contributor(s): Ali Roumani
Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015. Both lectures slides and lecture videos are presented.
-
Presentation of Micromechanics Simulation Challenge Level I Initial Results
10 Oct 2013 | Downloads
The attached slides summarize the Micromechanics Simulation Challenge Level I Initial Results in a presentation format. The complete report can be found at https://cdmhub.org/resources/948, and all the files supporting the results can be found...
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
13 May 2013 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...
-
HyperSizer for Composites: Insanely Fast Laminate Optimization
28 May 2014 | Tool Information
95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...