Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome

23 Jan 2019

The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...

VUMAT of a Generalized Standard Continuum Damage Model

13 Apr 2018 | Downloads

Based on a recently developed generalized standard continuum damage model (CDM), this VUMAT user subroutine provides a rigorous and robust framework for implementing various damage behavior into 2D or 3D solid elements in a finite element analysis (FEA). It is designed to be used with...

Woven fabrics UMAT- a coupled material model

02 Aug 2017 | Downloads

One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

Woven fabrics UMAT- a coupled material model

02 Aug 2017 | Downloads | Contributor(s): Ali Roumani

One of the advantages of woven fabrics over unidirectional prepregs is their superior formability thanks to the large shear deformation capability. There exists, however, a limit on the shear deformation of woven fabrics, namely the wrinkling. Applying tension to delay wrinkling during forming...

Puck Failure Criteria

31 Jul 2017 | Downloads

Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

Forming simulation using PAM-FORM, AniForm, LS-DYNA, and ABAQUS

18 Jul 2017 | Animations

Abaqus plugins for Nonlinear Acoustics

06 Jul 2017 | Downloads

This paper introduces generalized tools in the form of plugins for a commonly used commercial finite element package Abaqus/Standard to model the nonlinear acoustic methods for detection of delamination damage in composite laminates. The nonlinear acoustic methods typically involve exciting a...

TexGen4SC Tutorial #1: Homogenization Analysis of Textile Composites with Arbitrary Inter-ply Shifts

03 Jan 2017 | Downloads

This tutorial shows how to use TexGen4SC to perform homogenization analysis of textile composites with arbitrary inter-ply shifts. A companion video is available on YouTube. TexGen4SC can be launched directly from https://cdmhub.org/tools/texgen4sc. A python script for the...

TexGen4SC

13 May 2013 | Tools

Modeling of woven fabric composites generated by TexGen using SwiftComp

TexGen4SC

14 Feb 2014 | Tools

Modeling of woven fabric composites generated by TexGen using SwiftComp

Demystifying Composites Simulation for Performance

05 Nov 2024 | Downloads | Contributor(s): Ali Roumani

The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation. 

ABAQUS-SwiftComp GUI

19 May 2016 | Downloads

This resource contains the download of the release package of ABAQUS-SwiftComp GUI.  Please be advised that what you download is the GUI only, you have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

2015 cdmHUB Workshop

05 Jan 2016 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

2015 cdmHUB Workshop

05 Jan 2016 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

2015 cdmHUB Workshop

05 Jan 2016 | Series | Contributor(s): Ali Roumani

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

ABAQUS-VABS GUI

29 Jun 2015 | Downloads

A Python script used to convert the input file generated by ABAQUS for VABS, a detailed step-by-step instruction using ABAQUS CAE to generate a simple beam section (composite anisotropic pipe)  is also given. Python scripts for generating more complex sections such as real...

HyperSizer for Composites: Insanely Fast Laminate Optimization

31 Mar 2015 | Tool Information

95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

Skill of Using Surface Element in ANSYS

26 Mar 2015 | Downloads

Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

CATIA Composites Braiding

09 Mar 2015 | Animations

A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.

CATIA Composites Braiding

09 Mar 2015 | Animations | Contributor(s): Ali Roumani

A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.