Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites

14 Nov 2022

Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...

Practical Developments in Multiscale Modeling of Composites

07 Apr 2021

Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

MSC.Patran/Nastran-SwiftComp GUI

01 Apr 2019

A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

VABS: Powering Simple Beam Elements with Detailed 3D FEA Fidelity

06 Jan 2017

This presentation gives a brief introduction to VABS, a general-purpose cross-sectional analysis, which can power conventional, simple beam elements with detailed 3D FEA fidelity. 

Orthotropic Stress Concentration Factor

25 Sep 2014 | Tools

Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate

A Unified Theory for Constitutive Modeling of Composites

14 Aug 2014 | Publications

A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...

Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes

28 May 2014 | Publications

This is the Master thesis from Xin Liu in Prof Yu’s research group. In this thesis, the Mechanics of Structure Genome (MSG) has be used to provide an alternative way to model composite beam-like structures. Basic concept of MSG is introduced as well as the idea of how to carry out...

2015 cdmHUB Workshop

28 May 2014 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

HyperSizer for Composites: Insanely Fast Laminate Optimization

28 May 2014 | Tool Information

95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

28 May 2014 | Publications

A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

14 Aug 2014 | Publications

A new concept, Structure Genome (SG), is proposed to fill the gap between materials genome and structural analysis. SG acts as the basic building block of the structure connecting materials to structures and the mechanics of SG governs the necessary information to link materials genome and...

Variational Asymptotic Modeling of Composite Dimensionally Reducible Structures

28 May 2014 | Publications

This is Prof. Yu's PhD dissertation. In this disseration, the variational asymptotic method has be used to provide a systematic, holistic, and rigorous approach to construct efficient yet accurate models for composite beams, plates, and shells.  

The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

25 Sep 2014 | Teaching Materials

The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

28 May 2014 | Teaching Materials

The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

Plane-Stress Compliance Transform

25 Sep 2014 | Tools

Transforms 2D compliance terms by rotation about the 3-axis

Composite Materials and Structures 1972-2012: Grand Challenges

28 May 2014 | Teaching Materials

Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

2013 Composites Design and Manufacturing HUB Kickoff Workshop

28 May 2014 | Series

The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

HyperSizer Pro Software from Collier Research

28 May 2014 | Tool Information

HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...