Adaptive Multi-Scale & Multi-Fidelity Progressive Failure Analysis of Composites

14 Nov 2022

Although high-fidelity modeling of progressive damage has advanced our understanding of failure mechanisms in fibre-reinforced composites, such techniques are currently still too computationally intensive for direct application to composite structures. The multi-scale nature of damage in...

Practical Developments in Multiscale Modeling of Composites

07 Apr 2021

Validated models (be they data driven or physics based) can accelerate the design, certification, and ultimate deployment of novel materials and structures by allowing rapid iteration and virtual experimentation while at the same time minimizing the need for expensive and time consuming physical...

VABS: Modeling Composite Beam-like Structures with 3D FEA Fidelity

06 Feb 2021 | Contributor(s): Nikki Huang

This presentation was given at Altair Virtual ATCx Composites: https://atcxcomposites.virtual.altair.com/. Variational asymptotic beam section (VABS) is a unique technology continuously funded by the US Army since 1988 and it has become a tool of choice in the helicopter and wind turbine...

iVABS

19 Nov 2020 | Contributor(s): Nikki Huang

iVABS (namely integrated VABS), is a design framework for composite slender structures (also called composite beams) such as helicopter rotor blades, wind turbine blades, high aspect ratio wings, bridges, shafts, etc. This framework bundles PreVABS, VABS, GEBT, Dakota, along with msgpi for...

Constitutive modeling for time- and temperature-dependent behavior of composites

08 Jan 2020

Structural integrity, durability, and thermal stability represent critical areas for adequately modeling the behavior of composite materials. Polymeric matrices are prone to have time-dependent behavior very sensitive to changes in temperature that influence the effective properties of the...

MSC.Patran/Nastran-SwiftComp GUI

01 Apr 2019

A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

MSC.Patran/Nastran-SwiftComp GUI

01 Apr 2019

A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome

23 Jan 2019

The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...

PreVABS

16 Nov 2017 | Contributor(s): Nikki Huang

PreVABS is a pre-processing tool for VABS and SwiftComp. This tool is designed to reduce the workload of preparing input files of beam cross sections for VABS and SwiftComp, and to make the process automatic for the design and optimization purpose. Cross sections with general and...

Abaqus plugins for Nonlinear Acoustics

06 Jul 2017

This paper introduces generalized tools in the form of plugins for a commonly used commercial finite element package Abaqus/Standard to model the nonlinear acoustic methods for detection of delamination damage in composite laminates. The nonlinear acoustic methods typically involve exciting a...

VABS: Powering Simple Beam Elements with Detailed 3D FEA Fidelity

06 Jan 2017 | Contributor(s): Nikki Huang

This presentation gives a brief introduction to VABS, a general-purpose cross-sectional analysis, which can power conventional, simple beam elements with detailed 3D FEA fidelity. 

TexGen4SC

13 May 2013 | Tools

Modeling of woven fabric composites generated by TexGen using SwiftComp

A Unified Theory for Constitutive Modeling of Composites

14 Aug 2014 | Publications

A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...

2015 cdmHUB Workshop

13 May 2013 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

2015 cdmHUB Workshop

23 Jul 2014 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

ANSYS-VABS Graphic User Interface (GUI)

03 Aug 2015 | Downloads | Contributor(s): Nikki Huang

This resource contains the release package of ANSYS-VABS GUI.VABS code is NOT included. Manual and the source scripts for the interface can be found in the Supporting Documents.This GUI was developed based on ANSYS Release...

ABAQUS-VABS GUI

29 Jun 2015 | Downloads | Contributor(s): Nikki Huang

A Python script used to convert the input file generated by ABAQUS for VABS, a detailed step-by-step instruction using ABAQUS CAE to generate a simple beam section (composite anisotropic pipe)  is also given. Python scripts for generating more complex sections such as real...

HyperSizer for Composites: Insanely Fast Laminate Optimization

31 Mar 2015 | Tool Information

95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

A Critical Assessment of Computer Tools for Calculating Composites Wind Turbine Blade Properties

16 Mar 2015 | Publications | Contributor(s): Nikki Huang

The purpose of this paper is to critically assess several computer tools for calculating the inertial and structural properties of wind turbine blades. The theoretical foundation of each tool is briefly summarized, and the advantages and disadvantages of each tool are pointed out. Several...

CATIA Composites Braiding

09 Mar 2015 | Animations

A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.