2013 Composites Design and Manufacturing HUB Kickoff Workshop

Category

Series

Published on

Abstract

The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

Cite this work

Researchers should cite this work as follows:

  • (2014), "2013 Composites Design and Manufacturing HUB Kickoff Workshop," https://cdmhub.org/resources/549.

    BibTex | EndNote

Location

Purdue University

Tags

In This Series

  1. Nanohub and the HUBzero Platform

    16 Aug 2014 | Online Presentations | Contributor(s): Michael McLennan

    Dr. Michael McLennan describes the nanoHUB and HUBzero platform at the May 2013 Composites Design and Manufacturing HUB workshop.

  2. Molding and Microstructure Simulation for Discontinuous-Fiber Composites

    14 Aug 2014 | Online Presentations | Contributor(s): Charles Tucker

    Professor Charles Tucker discusses Molding and Microstructure Simulation for Discontinuous-Fiber Composites at the May 2013 Composites Design and Manufacturing HUB workshop.

  3. From Research to Applications

    14 Aug 2014 | Online Presentations | Contributor(s): Jacob Fish

    Professor Jacob Fish discusses composites simulation from research to applications at the May 2013 Composites Design and Manufacturing HUB workshop.

  4. Simulation and Modeling: a Material Supplier Perspective

    14 Aug 2014 | Online Presentations | Contributor(s): Carmelo LoFaro

    Carmelo LoFaro discusses a material supplier perspective on the need for simulation and modeling at the May 2013 Composites Design and Manufacturing HUB workshop.

  5. The Challenge and Vision for cdmHUB

    14 Aug 2014 | Online Presentations | Contributor(s): Byron Pipes

    Professor R. Byron Pipes presents the challenge and vision for the cdmHUB at the May 2013 Composites Design and Manufacturing HUB workshop