TexGen4SC

13 Sep 2016 | Tools | Contributor(s): Xin Liu, Wenbin Yu

Modeling of woven fabric composites generated by TexGen using SwiftComp

2016 cdmHUB ASC Workshop

01 Sep 2016 | Series | Contributor(s): cdmHUB Purdue

Join us at the American Society for Composites 31st Technical Conference (http://mech.utah.edu/ASC2016/) for a hands-on workshop, on September 18, from 7:00–9:00pm, on how to use cdmHUB.org for composites learning, teaching, and research in the cloud. With the mission to convene the...

Generalized Free-Edge Stress Analysis Using Mechanics of Structure Genome

22 Aug 2016 | Publications | Contributor(s): Bo Peng, Johnathan Goodsell, Byron Pipes, Wenbin Yu

This work reveals the potential of mechanics of structure genome (MSG) for the free-edge stress analysis of composite laminates. First, the cross-sectional analysis specialized from MSG is formulated for solving a generalized free-edge problem of composite laminates. Then, MSG and the companion...

Orthotropic Stress Concentration Factor

16 Aug 2016 | Tools | Contributor(s): Johnathan Goodsell

Calculates the stress concentration factor for a circular hole in an infinite orthotropic plate

Demystifying Composites Simulation for Performance

28 Jul 2016 | Downloads | Contributor(s): Wenbin Yu

The presentation given in IACMI Tutorial session before the 2016 Summer Members Meeting. It tried to explain in layman terms modeling and simulation, and composites, pointed out the barriers we need to overcome to reap full benefits of simulation for composites innovation. 

Drape Forming

19 Jul 2016 | Tool Information | Contributor(s): Brett Terbrack

ANSYS-SwiftComp GUI

19 May 2016 | Downloads | Contributor(s): Banghua Zhao, Fang Jiang, Zheng Ye, Wenbin Yu

This resource contains the download of the release package of ANSYS-SwiftComp GUI. Please be advised that what you download is the GUI only. You have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

ABAQUS-SwiftComp GUI

19 May 2016 | Downloads | Contributor(s): Bo Peng, Orzuri Rique, Su Tian, Wenbin Yu

This resource contains the download of the release package of ABAQUS-SwiftComp GUI.  Please be advised that what you download is the GUI only, you have to fill the form at http://analyswift.com/software-trial/ to request SwiftComp from AnalySwift LLC for performing the...

Mechanics of Structure Genome:Fill the Gap between Materials Genome and Structural Analysis

18 May 2016 | Downloads | Contributor(s): Wenbin Yu

This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation. 

DymPet-Surfacing Tissue

09 May 2016 | Web Links | Contributor(s): Dolores lee

DymPet is Dymriton's surfacing tissue series, an needled felt made of polyester fibers & applied in Filament Windling,Pultrusion.DymPet used for FRP surface treatment, prevent fibre print through from fibre glass. DymPet is paved direct to mould cavity or below gelcoat. White &...

A Unified Theory for Constitutive Modeling of Composites

18 Apr 2016 | Publications | Contributor(s): Wenbin Yu

A unified theory for multiscale constitutive modeling of composites is developed using the concept of structure genomes. Generalized from the concept of the representative volume element, a structure genome is defined as the smallest mathematical building block of a structure. Structure...

Use of Digimat to Simulate Progressive Failure in a T-stiffener Accounting Voids Due to Manufacturing Defects

18 Apr 2016 | White Papers/Research Documents | Contributor(s): Xuan Wang

Laminate T-stiffeners are widely used in the aerospace industry to transfer the 3D complex loads between the stiffener and theskins. However, the way they are manufactured can affect their inherent properties.In this case, we have considered that the stiffener and the skin were assembled using an...

Digimat Virtual Allowables, to complement physical testing of composite coupons

18 Apr 2016 | Animations | Contributor(s): Mira Toth, Roger Assaker

Integrated Solution to Compute Virtual AllowablesTools such as Digimat-VA are essential to the integration of composites into aerospace and automotive design. Physical testing alone cannot give engineers the versatility they need to take full advantage of composites’ potential. It is not...

Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes

18 Apr 2016 | Publications | Contributor(s): Xin Liu

This is the Master thesis from Xin Liu in Prof Yu’s research group. In this thesis, the Mechanics of Structure Genome (MSG) has be used to provide an alternative way to model composite beam-like structures. Basic concept of MSG is introduced as well as the idea of how to carry out...

LAMMPS

09 Oct 2015 | Tools | Contributor(s): Benjamin Haley

Upload a command script and data file to run LAMMPS.

2015 Composites Simulation Workshop Agenda

29 Oct 2015 | Teaching Materials | Contributor(s): cdmHUB

2015 Composites Simulation Workshop Agenda

2015 cdmHUB Workshop

05 Jan 2016 | Series | Contributor(s): Johnathan Goodsell

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

Variational Asymptotic Modeling of Composite Dimensionally Reducible Structures

23 Dec 2015 | Teaching Materials | Contributor(s): Wenbin Yu

Prof. Yu's PhD dissertation.

Composites Process Simulation: From Fundamentals to Applications

24 Nov 2015 | Online Presentations | Contributor(s): Corey Lynam

This is the presentation on Compro given by Corey Lynam from Convergent Manufacturing Technologies on the 2015 Composites Simulation Workshop.

Moldex3D Simulation Technology for Fiber Reinforced Composite Processing

24 Nov 2015 | Online Presentations | Contributor(s): Srikar Vallury

This is the presentation given by Srikar Vallury for Moldex3D from CoreTech System Co., Ltd.