MSG-based Multiscale Modeling for Beams

05 Jul 2019 | Downloads | Contributor(s): Gerhard Klimeck

Presentation given in Summer 2019 at Wuhan University of Technology. 

Multiscale analysis of multilayer printed circuit board using Mechanics of Structure Genome

23 Jan 2019 | Publications

The structure of Printed Circuit board (PCB) is very complicated because it consists of woven composites and custom defined conducting layers. To improve the reliability of PCB, it is critical to predict the constitutive relations accurately. This study by implementing Mechanics of Structure...

Puck Failure Criteria

31 Jul 2017 | Downloads

Composite materials have been established as competitive materials during the last few decades due to their high strength to l ow weight ratio among other advantages and are widely used in many industries. A recent study has found that the industrial usage of composite failure...

Abaqus plugins for Nonlinear Acoustics

06 Jul 2017 | Downloads

This paper introduces generalized tools in the form of plugins for a commonly used commercial finite element package Abaqus/Standard to model the nonlinear acoustic methods for detection of delamination damage in composite laminates. The nonlinear acoustic methods typically involve exciting a...

TexGen4SC

13 May 2013 | Tools

Modeling of woven fabric composites generated by TexGen using SwiftComp

2015 cdmHUB Workshop

13 May 2013 | Series

Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

ANSYS-VABS Graphic User Interface (GUI)

03 Aug 2015 | Downloads | Contributor(s): Gerhard Klimeck

This resource contains the release package of ANSYS-VABS GUI.VABS code is NOT included. Manual and the source scripts for the interface can be found in the Supporting Documents.This GUI was developed based on ANSYS Release...

HyperSizer for Composites: Insanely Fast Laminate Optimization

31 Mar 2015 | Tool Information

95% of users, without user manual, and without instruction, will be able to import their FEM and produce optimum composites laminates that satisfy all analyses to all load cases within the first 10 minutes. Your automatically updated model will have minimum weight and fully producible laminates...

CATIA Composites Braiding

09 Mar 2015 | Animations

A tool developed with BMW for strong structural Composites parts. Composites braiding is for high output cylindrical parts with minimal waste.

The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

08 Oct 2014 | Teaching Materials

The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

The Mission, Vision and Programs of the Composites Design and Manufacturing HUB

08 Oct 2014 | Teaching Materials

The presentation outlines the mission, vision and programs of the Composites Design and Manufacturing HUB as of October 2014.

Composite Materials and Structures 1972-2012: Grand Challenges

19 Sep 2014 | Teaching Materials

Professor R. Byron Pipes presents the Grand Challenges for Composite Materials for the next 40 years at the American Society of Composites Conference in Arlington, TX on October 2, 2012.

2013 Composites Design and Manufacturing HUB Kickoff Workshop

04 Sep 2014 | Series

The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

2013 Composites Design and Manufacturing HUB Kickoff Workshop

04 Sep 2014 | Series

The Composites Design and Manufacturing HUB held a kick-off workshop at Purdue University on May 29-30, 2013 with over 100 attendees from industry, academia and government.  Select presentations from the workshop are included in this series.

HyperSizer Pro Software from Collier Research

20 Aug 2014 | Tool Information

HyperSizer® is Design, Analysis, and Optimization Software for Composite and Metallic Structures HyperSizer is used throughout the design process--including certification--to quantify all critical failure modes, reduce structural weight, and sequence composite laminates for fabrication to...

PostGEBT

15 Aug 2014 | Downloads | Contributor(s): Gerhard Klimeck

PostGEBT is a post-processing code which can effectively visualize mass data generated by the nonlinear beam solver GEBT. PostGEBT reads and visualizes the results produced by GEBT for static, steady-state, transient dynamic, and eigenvalue analyses. More details can be found in the PostGEBT...

Geometrically Exact Beam Theory

30 May 2014 | Tools | Contributor(s): Gerhard Klimeck

A General-Purpose Nonlinear Analysis Tool for Composite Beams Considering All Elastic Couplings

Geometrically Exact Beam Theory

11 Jul 2014 | Downloads | Contributor(s): Gerhard Klimeck

Geometrically Exact Beam Theory (GEBT), is a general-purpose tool for nonlinear analysis of composite slender structures, meeting the design challenges associated with future engineering systems featuring highly-flexible slender structures made of composites. GEBT is based on the mixed...

Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop

27 Jun 2014 | Teaching Materials

Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...

Announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop

27 Jun 2014 | Teaching Materials

Flyer announcement for the 2014 Composites Design, Analysis and Manufacturing Workshop to be held at Purdue University, August 5-7, 2014.The Composites Design and Manufacturing HUB is holding a hands-on workshop in composites design, analysis and manufacturing. Join us at Purdue University on...